Inner Mongolia Chemical Plant Steel Structure Fluorocarbon Paint Fluorocarbon Paint Expensive Raw Material Metal Fluorocarbon Paint

Description :

　　Fluorocarbon paint national standard quality manufacturer

　　Introduction to Fluorocarbon Paint

　　Fluorocarbon primer is mainly based on fluorine modified polymer resin, with various corrosion-resistant pigments, fillers, additives, and solvents added and ground to form a group.

　　Product Features

　　Fluorocarbon primer has good permeability, sealing properties, excellent alkali resistance, acid rain resistance, and carbonization resistance. It has excellent resistance to mold erosion and strong adhesion, and can effectively resist the corrosion of chemicals such as acid, alkali, and salt on the substrate.

　　Scope of application

　　1. Fluorocarbon primer is widely used in cement mortar, concrete, brick walls, asbestos boards, and other interior and exterior walls of buildings. 2. Fluorocarbon primer is used for walls with strong absorption capacity and powdered old paint films to save topcoat and improve adhesion.

　　Technical Specifications

　　Ignition point: 16 degrees Celsius Theoretical spray rate: 69.74 (DFT 5 UM2/E) Solid content: 34.87%

　　Construction Instructions

　　Surface treatment: Please remove any moisture, oil stains, and other foreign objects from the sprayed surface before applying chromate pre-treatment before spraying Spray method: SPRAY/Dilution solvent: ST-100 Dilution viscosity: 10-15 seconds (FORD # 4) Coating thickness: Wet coating: 13-20um Dry coating: 5-10um Drying conditions: wet on wetSetting hours: 10 minutes (room temperature) Outer layer spray

　　construction method

　　Brush coating, roller coating, spray coating

　　Precautions

　　1. Avoid contact between fluorocarbon primer and skin. 2. Do not mix fluorocarbon primer with other coatings. 3. Fluorocarbon primer has ignition properties and should be kept away from sources of fire. 4. Please seal and store the remaining fluorocarbon primer after use

　　Epoxy sealing primer is composed of epoxy resin, polyamide resin, pigments, additives, and solvents. It is mainly used as a sealing agent for coating zinc (zinc coating) and cold galvanizing high zinc coatings, as well as for metal zinc spray coatings.

AfterSalesService :

• Fluorocarbon paint for steel structures in chemical plants