Jilin Yanbian gray fluorosilicone resin paint gray dam guardrail fluorosilicone resin anti-corrosion paint

Description :

　　The reason why fluorosilicone resin anti-corrosion paint is durable for more than 20 years is due to milk smoke. 4000h bridge steel structure anti-corrosion paint. Fluorosilicone resin anti-corrosion paint manufacturer

　　1、 Composition: The paint is mainly based on modified polymer resin, with various corrosion-resistant pigments, fillers, radiation resistant additives, and solvents added and ground to form component one and component two as curing agents.

　　2、 Main features and applications: This paint has ultra long weather resistance, excellent light and color retention, acid resistance, oil resistance, salt spray resistance, super strong pollution resistance, high strength and strong adhesion, dense coating, good freeze-thaw resistance, and good decorative properties. Widely used for anti-corrosion decoration of pipelines, equipment storage tanks, reaction vessels, highway guardrails, high-end buildings, steel structures, etc. in petroleum and chemical plants.

　　3、 Technical indicators:

　　project indicators

　　Color and appearance: Smooth and even paint film

　　Viscosity, S90-120

　　Fineness, um35-45

　　Adhesion level 2

　　Impact strength, kg/cm250

　　Drying time, h table drying 2

　　Practical 24

　　No change in water resistance

　　No change in acid and alkali resistance

　　No change in weather resistance

　　4、 Construction reference:

　　1. Spray sand or manually remove rust to Sa2.5 or St3 level on the surface of the coated object, apply the primer and dry it before applying the topcoat. Mix the paint according to the specified ratio and let it sit for 10 minutes before use. The paint should be diluted with a special thinner, which can be sprayed or brushed. The construction equipment should be dry and free of water. Avoid construction under scorching sun, sandstorms, and rainy days. The construction site should isolate the fire source and have good ventilation conditions.

　　2. The prepared paint should be used up within 6 hours to avoid gelatinization and waste. The remaining paint should be tightly covered and stored in a cool and dry place. The interval between each coat of paint should be at least 24 hours, and the last coat of topcoat should be maintained for 7-15 days before use.

AfterSalesService :

• Grey fluorosilicone resin paint