CX series medium pressure fan, through type blower, boiler combustion supporting medium pressure fan

Description :

CX series medium pressure fan, through type blower, boiler combustion supporting medium pressure fan

CX transparent blowerTechnical Specifications:

　　Model Power

　　CX-20SAH-1AC-3AC- 0.2KW

　　CX-75SAH-1AC-3AC- 0.4KW

　　CX-75-AH-1AC-3AC- 0.75KW

　　CX-100AH-3AC- 1.5KW

　　CX-125AH-3AC-2.2KW

　　CX-150AH-3AC- 3.7KW

　　CX-7.5AH-3A5.5KW

　　CX-10HP-3AC-7.5KW

　　CX series blower protection level: can reach protection levels of IP54 and IP55

Transparent medium pressure blowerPrinciple:

　　The common medium pressure fan is a centrifugal fan, whose impeller is covered with a mechanical shell and the center of the impeller is the air inlet. When the medium pressure fan is working, the power equipment drives the impeller to rotate, drawing air in from the air inlet. During the rotation of the blades of a centrifugal fan, a dynamic force is applied to the gas, increasing its pressure and velocity. The gas is discharged from the exhaust port along the blade path under the action of centrifugal force.

Cast aluminum medium pressure blowerpurpose

　　Food machinery equipment, sewage treatment equipment, fish pond oxygenation equipment, dust removal equipment, feeding equipment, plastic machinery equipment, packaging machinery equipment, woodworking machinery equipment, cleaning machinery equipment, printing machinery equipment, boiler combustion equipment, cooling machinery equipment, breeding enterprise equipment, exhaust gas emission equipment, laser cutting equipment, hot spring swimming pool equipment, environmental machinery equipment, vacuum dehydration equipment, blown film machinery equipment, filling machinery equipment, textile machinery equipment, paper cutting machinery equipment, suction and blowing equipment, drying and drying equipment, carving machinery equipment, sanitary napkin machinery equipment, diaper machinery equipment, air knife drying equipment, PCB circuit board equipment, beverage production line equipment, air knife water removal equipment, bean product equipment, hot air drying equipment, environmental protection Industry, etc

CX medium pressure fanAdopting a motor direct connection type, it does not require any variable speed mechanism. Due to its simple structure and direct transmission form, it also has the advantages of low noise, low energy consumption, stable performance, and easy maintenance. Moreover, the air source sent out is free of water, oil, and low temperature rise, which cannot be compared to other air source equipment. It is a new type of gas source generation equipment that uses high-strength and aluminum alloy materials as the main materials. It has the characteristics of compact structure, small volume, and light weight

Industrial medium pressure blowerOperation and maintenance:

　　After installation, the blower should be manually rotated before starting to check for any abnormal collisions or friction, whether the rotation direction of the motor is correct, and whether the inlet and outlet valves are in a low flow state.

　　2. During the operation of the fan, attention should be paid to whether there are any abnormal sounds, oil leaks, abnormal vibrations, high bearing temperature, excessive motor current, loose feet, or other abnormal phenomena inside the fan and motor, and they should be eliminated in a timely manner.

　　3. After using the fresh air fan, the bearing grease should be replaced.

　　4. Maintenance: When inspecting the casing, first loosen the screws on the horizontal split surface, open the upper half of the casing and the upper covers of the bearing boxes on both sides, and remove the rotor to repair the rotor or casing. During maintenance, special attention should be paid to whether the impeller blades are broken, whether there are cracks, and whether the main shaft is bent. Before installing and dismantling the machine casing, it is necessary to be careful to avoid damaging the rotor due to the swinging of the upper half of the casing during the installation and dismantling process.

　　5. During the shutdown period of the fan, the inlet and outlet of the fan should be covered properly to prevent debris from falling into the fan cavity and causing accidents.

　　6. The fan needs to be inspected every six months to remove dust and oil stains from the fan flow channel.

AfterSalesService :

• CX series medium pressure fan