HTB transparent medium pressure fan 1.5KW full air blower supply and exhaust medium pressure blower manufacturer

Description :

HTB transparent medium pressure fan 1.5KW full air blower supply and exhaust medium pressure blower manufacturer

Coulson medium pressure fanThe wind pressure refers to the pressure required to make air flow in a pipeline, which is called wind pressure. Wind pressure can be divided into two parts: static pressure and dynamic pressure. Static pressure acts around the pipeline to overcome the resistance encountered by air flow, with positive and negative effects. When the pressure inside the air duct is higher than the external atmospheric pressure, it is called positive static pressure. At this time, air blows outward from the pipeline, such as in the outlet duct of a condenser fan, which has positive static pressure. When the pressure inside the air duct is lower than the external atmospheric pressure, it is negative static pressure. At this time, air is sucked into the air duct from the outside, such as in the cotton inlet pipe of the condenser, which is negative static pressure.

Application of cast aluminum medium pressure blower

　　Food machinery equipment, sewage treatment equipment, fish pond oxygenation equipment, dust removal equipment, feeding equipment, plastic machinery equipment, packaging machinery equipment, woodworking machinery equipment, cleaning machinery equipment, printing machinery equipment, boiler combustion equipment, cooling machinery equipment, breeding enterprise equipment, exhaust gas emission equipment, laser cutting equipment, hot spring swimming pool equipment, environmental machinery equipment, vacuum dehydration equipment, blown film machinery equipment, filling machinery equipment, textile machinery equipment, paper cutting machinery equipment, suction and blowing equipment, drying and drying equipment, carving machinery equipment, sanitary napkin machinery equipment, diaper machinery equipment, air knife drying equipment, PCB circuit board equipment, beverage production line equipment, air knife water removal equipment, bean product equipment, hot air drying equipment, environmental protection Industry, etc

Principle of Transparent Medium Pressure Blower:

　　The common medium pressure fan is a centrifugal fan, whose impeller is covered with a mechanical shell and the center of the impeller is the air inlet. When the medium pressure fan is working, the power equipment drives the impeller to rotate, drawing air in from the air inlet. During the rotation of the blades of a centrifugal fan, a dynamic force is applied to the gas, increasing its pressure and velocity. The gas is discharged from the exhaust port along the blade path under the action of centrifugal force.

Operation and maintenance of industrial medium pressure blower:

　　After installation, the blower should be manually rotated before starting to check for any abnormal collisions or friction, whether the rotation direction of the motor is correct, and whether the inlet and outlet valves are in a low flow state.

　　2. During the operation of the fan, attention should be paid to whether there are any abnormal sounds, oil leaks, abnormal vibrations, high bearing temperature, excessive motor current, loose feet, or other abnormal phenomena inside the fan and motor, and they should be eliminated in a timely manner.

　　3. After using the fresh air fan, the bearing grease should be replaced.

　　4. Maintenance: When inspecting the casing, first loosen the screws on the horizontal split surface, open the upper half of the casing and the upper covers of the bearing boxes on both sides, and remove the rotor to repair the rotor or casing. During maintenance, special attention should be paid to whether the impeller blades are broken, whether there are cracks, and whether the main shaft is bent. Before installing and dismantling the machine casing, it is necessary to be careful to avoid damaging the rotor due to the swinging of the upper half of the casing during the installation and dismantling process.

　　5. During the shutdown period of the fan, the inlet and outlet of the fan should be covered properly to prevent debris from falling into the fan cavity and causing accidents.

　　6. The fan needs to be inspected every six months to remove dust and oil stains from the fan flow channel.

AfterSalesService :

• Transparent medium pressure fan