Manufacturer of production and processing equipment for broken bridge aluminum doors and windows

Description :

　　Manufacturer of production and processing equipment for broken bridge aluminum doors and windows

　　Product Introduction of Tianma Brand Broken Bridge Aluminum Doors and Windows Processing Equipment

　　LJMJ-420B semi-automatic corner code sawing machine for aluminum doors and windows

　　Functional Description

　　This machine is specifically designed for cutting corner codes of aluminum doors and windows. It uses imported hard alloy saw blades and high-precision spindles for high machining accuracy; The feed motion pair adopts linear motion guide rails and bearings, with low motion resistance and high accuracy; The propulsion system adopts gas-liquid damping, ensuring smooth operation; And equipped with imported digital rulers to make the operation simpler and more accurate.

　　machining accuracy

　　Verticality of cutting surface ≤ 0.1mm;

　　The flatness of the cutting surface is ≤ 0.1mm;

　　The roughness of the cutting surface is Ra12.5 μ m

　　Main technical parameters:

　　Working voltage 380V 50Hz

　　Motor power 1.5KW

　　Working pressure 0.6-0.8Mpa

　　Gas consumption 100L/min

　　Motor speed 2840r/min

　　There is no limit to the selection of manual sawing length

　　Sawing width x height 140 x 140

　　Saw blade size Φ 450 × Φ 30

　　Saw blade feed rate 0-3m/min

　　Dimensions 5670 × 1770 × 1840mm

　　The equipment of Jinan Tianma Machinery Co., Ltd. needs three layers of strict quality inspection before leaving the factory. Technical personnel conduct 4-5 national visits every year to provide technical guidance and equipment maintenance, regardless of whether the equipment you purchase has any problems. This can save consumers a lot of unnecessary trouble in their work and improve quality and efficiency.

　　Manufacturer of production and processing equipment for broken bridge aluminum doors and windows

AfterSalesService :

• Production and processing equipment for broken bridge aluminum doors and windows