Shandong Jinan Tianma Broken Bridge Aluminum Door and Window Equipment Co., Ltd

Description :

　　Shandong Jinan Tianma Broken Bridge Aluminum Door and Window Equipment Co., Ltd

　　Jinan Tianma Machinery Co., Ltd. recommends three commonly used configurations to everyone:

　　1. Practical configuration of broken bridge aluminum doors and windows equipment

　　Four pieces of equipment including 06 type cutting saw with corner code cutting function, corner assembly machine, end face milling machine 200, and hardware punching machine, meet the basic production needs of customers.

　　2. Basic bridge cut aluminum door and window equipment configuration

　　Six equipment including digital dual head accurate saw, heavy-duty corner code saw, corner assembly machine, mid end milling, high-speed single axis imitation milling, and hardware punching machine, meet customers' requirements for machining accuracy and production efficiency.

　　3. Luxury bridge cut aluminum door and window equipment configuration

　　Six sets of equipment, including CNC double head saw, heavy-duty corner saw, sunken corner forming machine, combined end face milling, high-speed dual axis imitation milling, and hardware punching machine, meet customers' high requirements for machining accuracy and automation.

　　There is a complete range of equipment for broken bridge aluminum doors and windows, and there is always this one that suits you. At the same time, Jinan Tianma Machinery Equipment Co., Ltd. reminds everyone to follow the principle of making the best use of everything when purchasing, as long as it is sufficient, what is suitable is good.

　　Before installing the broken bridge aluminum door and window equipment, preparation work needs to be done. What preparation work does the customer need to do in order to install and debug it as soon as possible and work normally? Jinan Tianma will answer this for you:

　　1. In terms of electricity Due to the commonly used voltage of 380V for broken bridge aluminum door and window equipment, it is important to pay attention to the connection between the live and neutral wires when wiring Generally speaking, door and window equipment manufacturers will distinguish eye colors, with the live wire being black or blue and the neutral wire being red (depending on each factory's situation) If the live wire is reversed, simply switch two wires at either end of the live wire

　　2. In terms of gas source Due to the fact that the pressure material of the broken bridge aluminum door and window equipment is compressed by cylinders, ensuring sufficient gas supply is a prerequisite for the efficient use of the equipment If the air pressure cannot be reached, the saw blade of the double headed cutting saw for broken bridge aluminum profiles will be affected, and the corresponding processing effect will also be affected Generally speaking, a set of broken bridge aluminum door and window equipment should ensure that the air pressure can reach 8 pressures and the gas supply flow rate can reach 0.3. If there are too many devices, relying solely on air pumps is not enough, and one or two gas storage tanks need to be prepared

　　3. In terms of equipment Due to the numerous classifications of broken bridge aluminum door and window equipment, each type of equipment may have several machines The inspection of door and window equipment is particularly important, such as the air pipe plug of the cutting saw, the speed of the saw blade entering and exiting, and the working status of the saw head on both sides Product detailed consultation Tianma Machinery

　　Shandong Jinan Tianma Broken Bridge Aluminum Door and Window Equipment Co., Ltd

AfterSalesService :

• Broken bridge aluminum door and window equipment