Tianma brand manufacturer of broken bridge aluminum doors and windows equipment

Description :

　　Tianma brand manufacturer of broken bridge aluminum doors and windows equipment

　　The commonly used machine configurations for Tianma brand broken bridge aluminum door and window equipment include

　　1. Aluminum profile double head cutting saw (digital display double head saw, CNC double head saw, 06 saw, straight 06 saw, heavy-duty double head saw)

　　2. Aluminum door and window corner code cutting saw (450 fully automatic corner code saw, 450 semi-automatic corner code saw, 500 fully automatic corner code saw, 500 CNC corner code saw)

　　3. Aluminum door and window corner assembly machine (single head corner assembly machine, double head corner assembly machine, four head corner assembly machine, heavy-duty corner assembly machine)

　　4. Aluminum door and window end milling machine (200 small end milling, 250 medium end milling, 250A large end milling)

　　5. Aluminum door and window punching equipment (four station punching machine, five station punching machine, six station punching machine, single axis imitation milling machine, double axis imitation milling machine, locking groove processing machine)

　　If you have any questions about product information quotation, please contact Jinan Tianma Machinery Manufacturing Co., Ltd. in a timely manner

　　The following is an introduction to the high-efficiency imitation milling machine product for broken bridge aluminum doors and windows equipment

　　LXF-120 aluminum-plastic profile high-speed single axis imitation milling machine

　　Product Description

　　Used for processing PVC and aluminum alloy door and window handle holes, as well as hardware installation holes and slots.

　　Two standard imitation templates on the left and right control the imitation size, with a imitation ratio of 1:1. Model adjustment and replacement are simple, widely applicable, and efficient.

　　Equipped with a high-speed profile needle milling head and a three-stage profile needle design, it can adapt to various profile size requirements.

　　Centralized positioning is convenient and fast, and can process holes and grooves in different positions.

　　Technical Specifications

　　Input power: 2 × 0.75kw

　　Power supply: 380V 50Hz

　　Working pressure: 0.4-0.6MPa

　　Gas consumption: 30L/min

　　Milling cutter diameter: Φ 5, Φ 8

　　Imitation contact diameter: Φ 5, Φ 8

　　Copying range: 290 × 90 × 100mm in the vertical direction

　　Horizontal direction 290 × 85 × 85mm

　　Dimensions: 1000 × 1130 × 1500mm

AfterSalesService :

• Broken bridge aluminum door and window equipment