Classification of Mud Purification Separators for Grouting Piles, Fine Constant Slag Slurry, Cement and Sand Removal Separators

Description :

　　Classification of Mud Purification Separators for Grouting Piles, Fine Constant Slag Slurry, Cement and Sand Removal Separators

　　The sediment separator is mainly used for circulating water in pile driving, which can filter out 98% of sand and greatly reduce the possibility of drilling being stuck. It can speed up our construction process. It also greatly reduces the amount of mud to be processed in the later stage of the project. The turbid mud from the sediment separator can be recycled for pile driving, and the dry materials are mainly fine sand and small particle stones. Dry materials can be used for backfilling.

　　The mud purification device is suitable for mud purification and recovery in pile foundation engineering (including rotary drilling, impact drilling, etc.), anti-seepage wall engineering (diaphragm wall, double wheel milling), mud water balance shield tunneling construction, and mud water pipe jacking construction that use mud wall protection and circulating drilling technology. The improvement of the reuse rate of waste mud avoids the arbitrary discharge of mud, helps customers reduce construction costs, and promotes civilized and environmentally friendly construction. Main advantages: Fully purify the mud, effectively control the performance indicators of the mud, reduce drilling accidents, and improve the quality of drilling. Realize mud recycling and save slurry materials. Significantly reduce the cost of transporting waste slurry and the cost of slurry production. The effective separation of soil slag by equipment is beneficial for improving the efficiency of pore making. The closed-loop circulation purification method of mud and the reduction of low slag moisture content have an impact on the environment. Adopting a double-layer screen, the purification effect is improved by nearly 50% compared to a single-layer screen. It is easy to operate, easy to maintain, and operates stably and reliably. The slurry purification separator for injection piles is classified as a fine constant slag slurry de cement sand separator.

　　To improve the dewatering performance of sludge, an appropriate amount of organic polymer flocculant, such as polyacrylamide (PAM), should be uniformly added before mechanical dewatering to reduce the specific resistance of sludge and make it easier to dewater after solid and liquid phase separation. The type of flocculant must be adapted to the characteristics of the sludge and to the type and operating conditions of the equipment. In many cases, the agents that perform well in the flocculant selection beaker test do not perform better in practical applications. The important reason is that although the characteristics of the agents meet the sludge characteristics to a certain extent, they cannot fully meet the classification of the slurry purification separator for injection piles and the cement sand separation separator for fine and constant slag slurry with the operating conditions of the equipment.

AfterSalesService :

• Grouting pile mud purification separator