Manufacturing of precision drilling pile mud purification device for injection pile mud purification separator

Description :

　　Manufacturing of precision drilling pile mud purification device for injection pile mud purification separator

　　The sediment separator is mainly used for circulating water in pile driving, which can filter out 98% of sand and greatly reduce the possibility of drilling being stuck. It can speed up our construction process. It also greatly reduces the amount of mud to be processed in the later stage of the project. The turbid mud from the sediment separator can be recycled for pile driving, and the dry materials are mainly fine sand and small particle stones. Dry materials can be used for backfilling.

　　Mud purification device is a new type of mud purification equipment developed for the use of protective mud in small-scale pile construction (including impact drilling), pipe jacking engineering, bridge pile foundation engineering, construction engineering, underground tunnel shield engineering, and non excavation engineering construction. It can effectively control the quality of slurry water in construction mud, separate solid and liquid particles in the mud, improve the porosity of pile foundations, reduce the amount of bentonite used, lower the cost of slurry production, and achieve environmentally friendly transportation and discharge of slurry waste, meeting the on-site requirements of environmentally friendly construction. Suitable for mud purification and recovery in pile foundation engineering, anti-seepage wall engineering, and mud water pipe jacking construction using mud wall protection, rotary drilling rig, and cyclic drilling technology. Greatly improving the reuse rate of waste mud, avoiding the arbitrary discharge of mud, and helping customers reduce construction costs. Manufacturing of precision drilling pile mud purification device for injection pile mud purification separator and precision drilling pile mud purification device

　　Desander is a secondary solid control equipment in the solid control system, used to separate solid particles with a particle size greater than 47 microns in drilling fluid. The function of the sand remover is to reduce the load on downstream mud removers. Installing a sand remover in front of the sludge remover can effectively remove a large amount of particles from the load of the sludge remover and improve its working efficiency. When drilling at high speeds, especially in shallow sections with loose soil, large-diameter drill bits are usually used, which can generate a large amount of drill cuttings. This may lead to "rope like" discharge from the mud remover port. Therefore, it is necessary to install a sand remover upstream of the mud remover, which can provide a larger volume capacity to separate coarser drill cuttings. Only when the sand remover removes large particles of drill cuttings from high concentration fluids, can the mud remover more effectively handle the overflow on the sand remover. If the drilling speed is slow and can only produce about half a ton of drilling cuttings per hour, the desilting device can usually handle all the circulating drilling fluid. At this time, the desilting device can be turned off and the slurry purification separator for the injection pile can be manufactured.

AfterSalesService :

• Grouting pile mud purification separator