Double track geomembrane hot melt welding machine HDPE climbing welding machine manufacturer
Category:
mechanical equipment/Welding and cutting equipment/Plastic welding machine
Model:
JH10/JH15/JH20
Brand:
Jingheng
Retail Price
2,700.00USD
重量
kg
- Product Description
-
Description :
Double track geomembrane hot melt welding machine HDPE climbing welding machine manufacturer
Geomembrane welding machine is one of the many welding equipment, mainly used for welding HDPE, PE-C, PP, LDPE, groove surface geomembranes, and anti-seepage membranes; Mechatronics design, small size, light weight, and good operability for field operations. Double seam lap welding has high temperature control accuracy, high welding strength, and good sealing effect. The middle is the weld seam leak detection weld, and automatic crawling can achieve slope, vertical, and inverted automatic welding.
Especially for the sealing of both ends of large-diameter winding pipes with hollow walls, welding of pipe fittings, and repair of pipe damage, the applicable welding materials are thermoplastic plastics HDPE, PP, PVDF, especially PE can play its characteristics, but should not be applied to conductive plastics (PE-EL), otherwise it will cause conductivity short circuits in the machine. Changing different welding shoes can be applied to welding, splicing, welding, repairing, splicing, sealing of large-diameter plastic pipes and fittings, splicing and repairing of thickened plastic film materials and geomembranes. The hot air temperature is high, the temperature is stable, the motor power is large, the torque is large, the service life is long, the performance is stable, the whole machine is lightweight, and it is easy to hold. The machine has a large extrusion capacity and can weld welds exceeding 10mm. Different welding boots can be selected to be suitable for different types of welds. This machine is used on barrels and fittings in accordance with Part 4 of the DVS standard (German Welding Society). The technical parameters provided by the plastic extrusion welding factory include the main components and names of the hot air switch, temperature adjustment knob, hot air welding Y-shaped extrusion welding boots, air outlet, feed inlet, clamp, power plug placement bracket, drive motor speed adjustment knob, and handle.
AfterSalesService :
Key words:- Geomembrane hot melt welding machine
