Horizontal I-beam bending machine, Jingheng tunnel track steel cold bending machine production

Description :

　　Horizontal I-beam bending machine, Jingheng tunnel track steel cold bending machine production

　　Bending machines are now widely available in the market, capable of completing bending tasks for various types of steel such as channel steel, track steel, and round steel pipes. Different types of steel arches and arches with different angles require different grinding tools. The recognition of the bending machine in the market is very high now. Greatly improving the construction speed of profiles and saving labor for workers.

　　The I-beam bending machine is a device that uses oil as a medium. So it is necessary to do a good job of cleaning the equipment and avoid oil blockage or leakage. The oil must be kept clean, and theoretically, the usage time of the oil should not exceed two months. When changing the oil, colleagues should clean the fuel tank and filter screen. Be careful not to use a brush to clean the fuel tank. Firstly, the gantry bracket in the auxiliary system is placed in the center of the two active rollers, followed by the hydraulic system. In this way, the hydraulic cylinder will push the dovetail groove and cold bending rollers to cold press the steel. During this process, when the desired curvature is reached, the hydraulic system can be turned off. At this point, start the mechanical system again, let the active roller rotate, and rely on friction to drive the steel to slowly advance. This way, a continuous and efficient cold bending operation can be achieved. After the end of the process, turn off the mechanical transmission, start the hydraulic system, return the hydraulic cylinder to its original state, and place the cold-formed steel on the gantry bracket of the auxiliary system to complete the entire workflow. The six major systems of the cold bending system, hydraulic system, electrical control system, mechanical transmission, base, and auxiliary system are the horizontal I-beam bending machine, precision tunnel track steel cold bending machine, and production.

　　From this, it can be seen that timely maintenance is the key to ensuring the normal operation and full efficiency of the I-beam cold bending machine. To improve the maintenance and repair quality of the cold bending machine, the following points must be noted:

　　1. We must overcome the shortcomings of heavy production and light maintenance, and daily maintenance and upkeep must not be neglected. We must send for repairs in a timely manner and never allow operations to be carried out while sick;

　　2. The conditions must be met. When there are no necessary conditions, do not force disassembly and repair, as the quality of repair cannot be guaranteed;

　　3. When disassembling and assembling the cold bending machine, the parts should be carefully stored. Before and after disassembly, the parts should be neatly arranged to prevent collisions and exposure to sunlight and rain;

　　4. When disassembling and assembling, a certain process should be followed, respecting the clearance between the original components. The assembly clearance cannot be changed arbitrarily, and disassembly must be carried out according to the user manual. After assembly, trial operation work should be done well.

　　The above is an analysis of the main manifestations of the unreasonable use of I-beam cold bending machines. We hope that everyone can prevent similar situations from occurring in daily construction, such as the production of horizontal I-beam arch bending machines and Jingheng tunnel track steel cold bending machines.

AfterSalesService :

• Horizontal I-beam bending machine