Instructions for using the H steel bending arch machine for culverts and the Jingheng tunnel H steel cold bending machine

Description :

　　Instructions for using the H steel bending arch machine for culverts and the Jingheng tunnel H steel cold bending machine

　　Bending machines are now widely available in the market, capable of completing bending tasks for various types of steel such as channel steel, track steel, and round steel pipes. Different types of steel arches and arches with different angles require different grinding tools. The recognition of the bending machine in the market is very high now. Greatly improving the construction speed of profiles and saving labor for workers.

　　I-beam bending machine is a new type of processing equipment used to support steel arches in underground tunnels

　　Its main components include the base, hydraulic system, mechanical transmission, cold bending system, electrical control system, and auxiliary system. Cold bending equipment, as a steel processing equipment, not only improves processing power and quality, but also brings considerable economic benefits to the company, making it popular among users in industrial processing. However, there are many manufacturers of cold bending equipment in the market now, and there are also many types of cold bending equipment. Due to their uneven cold bending skills, the quality of cold bending equipment in the market is also uneven. So consumers are inevitably confused when making purchases. Instructions for using the H steel arch bending machine for culverts and the Jingheng tunnel H steel cold bending machine

　　Precautions for using I-beam bending machine

　　Proper use of the I-beam bending machine, careful implementation of equipment maintenance, and adherence to safety operating procedures are necessary conditions for reducing equipment failures, extending the service life of the I-beam cold bending machine, and ensuring safe production. The maintenance personnel of the cold bending machine must understand the structure, performance, maintenance methods, and operating procedures of the equipment. Do not start the motor until the fuel tank is filled with oil. Before use, first check if the fuel tank is full. If it is insufficient, it should be filled to prevent the oil pump from emptying. The hydraulic oil used in the I-beam cold bending machine must undergo strict filtration before being injected into the fuel tank. The fuel tank must be cleaned before loading. Usually, it is recommended to use anti-wear hydraulic oil No. 46. The I-beam cold bending machine uses oil as the medium, and it is necessary to clean and maintain the oil and equipment to avoid the effects of scaling or oil leakage. The oil must be kept clean. It should not exceed two months. When replacing, both the filter and the water tank should be cleaned simultaneously. Please note that the filter can be cleaned with kerosene and cannot be brushed with a hard brush. After deterioration and filtration, the H steel arch bending machine for culverts and the H steel cold bending machine for tunnels can still be used. Instructions for use.

AfterSalesService :

• Culvert H steel bending arch machine