250 I-beam bending machine, precise CNC track steel bending machine, small knowledge

Description :

　　250 I-beam bending machine, precise CNC track steel bending machine, small knowledge

　　Bending machines are now widely available in the market, capable of completing bending tasks for various types of steel such as channel steel, track steel, and round steel pipes. Different types of steel arches and arches with different angles require different grinding tools. The recognition of the bending machine in the market is very high now. Greatly improving the construction speed of profiles and saving labor for workers.

　　I-beam bending machine is an equipment for processing and manufacturing tunnel support steel arches

　　Cold bending machine is a specialized processing equipment designed to adapt to construction sections with poor surrounding rock geology, and can randomly change with changes in the surrounding rock. Firstly, choose a flat tabletop and place the machine firmly. You can pull the chassis legs apart to make the machine panel easier to observe. Insert the plug on the handheld sensor head into the socket on the panel and tighten it, paying attention to the positioning gap. Then insert one end of the power cord plug into the socket on the back panel of the chassis, and the other end into the power supply socket. Please make sure to use a single-phase three wire power supply. Next, turn on the main power switch on the back panel of the cold bending machine chassis, press the power button on the panel, wait for the green indicator light to be ready, and the machine can start working. Press and hold the setting button to set the appropriate value, usually between 0.5-2.0 seconds. Place the induction head on top of the container lid, press the start button on the handle, and the red heating indicator light will indicate that it is heating. Do not move the induction head away. After the red heating indicator light is turned off, move the induction head again. Wait for the green indicator light or the short beep of the internal buzzer to prompt before proceeding with the sealing operation of the next container. Check the sealing quality, adjust the setting button keys appropriately according to different materials, diameters of containers, and production efficiency, so as to achieve a sealing quality of 250 I-beam arch bending machine and CNC track steel bending machine.

　　Precautions to be taken during on-site operations: 1. After the equipment is started, it should be air operated for 1-2 minutes, and the skateboard should move at full stroke 2-3 times. If any abnormal sound or malfunction is found, the machine should be stopped immediately, the fault should be eliminated, and everything should be normal before starting work. 2. When the skateboard and each positioning axis are not at the origin, run the return to origin program. 3. When multiple people are working, there must be a dedicated person to command. When the processed parts are moved back and forth, the leader must give instructions to other personnel to cooperate closely and move in a consistent manner. 4. When the processed objects are loaded and unloaded on the material rack, there should be a dedicated person to command. When hearing the instructions, the wind top switch can be activated, and the objects should be placed neatly, leveled and firmly according to the management requirements. 5. When bending with a large degree of curvature, no one is allowed to stand at the end. 250 I-beam bending machine, precise CNC track steel bending machine, small knowledge.

AfterSalesService :

• 250 I-beam bending machine