Culvert channel steel bending arch machine, Jingheng tunnel channel steel cold bending machine parameters

Description :

　　Culvert channel steel bending arch machine, Jingheng tunnel channel steel cold bending machine parameters

　　Bending machines are now widely available in the market, capable of completing bending tasks for various types of steel such as channel steel, track steel, and round steel pipes. Different types of steel arches and arches with different angles require different grinding tools. The recognition of the bending machine in the market is very high now. Greatly improving the construction speed of profiles and saving labor for workers.

　　I-beam bending machine is one of the very common equipment in engineering, most commonly used in construction of tunnels, subways, water and electricity fields. It can quickly and effectively deform steel according to the predetermined shape. The emergence of this equipment has solved many problems in engineering construction and improved the efficiency of engineering construction.

　　1. Wear labor protective equipment according to the operating rules. If it is a female operator, she should also have her hair cut or combed.

　　2. Before starting up, the upper and lower grinding tools, material racks, material blocking racks, and sliders should be cleaned thoroughly.

　　3. Before processing, try to adjust the gap between the upper and lower grinding tools as evenly as possible.

　　4. Choose a suitable die size to handle data processing with different sizes. Generally, the selection of grinding die size is die size: data size is 8:1.

　　5. Generally speaking, the bending force of the workpiece cannot exceed 1000kn.

　　When the I-beam bending machine uses a bending wrench to bend thick steel bars, attention should be paid to mastering the operation essentials. The heel of the shoe should be firm, and both feet should stand on the arch step. Set the board, pay attention to the board saw, and the board mouth should be stuck to the steel bars. The force during bending is very slow. Do not use too much force to prevent the circuit board from falling off and personnel from tripping. It is not allowed to bend thick steel bars at heights or on scaffolding to avoid falling from heights due to breakage during operation. Before mechanical operation, the mechanical components should be inspected, and the no-load test operation is normal before formal operation. During operation, attention should be paid to concentration and familiarity with the direction of hovering work. The steel bars should rotate in the same direction as the stopper and work plate, and cannot be reversed. During the operation, the steel bars are placed in the middle and lower part of the plug. It is strictly prohibited to bend oversized steel bars. Accurate rotation direction. The distance between the hand and the plug shall not be less than 200mm. Due to the direct connection of the two-stage brake motor and reducer to the first stage reducer, the input-output speed ratio is accurate, the bending speed is stable and accurate, and the electric automatic control can be used to change the speed. The brake can ensure the bending angle. The steel bars are bent in both directions by the forward and reverse rotation of the electric motor. The central axis can be replaced for easy maintenance. Intelligent control can be used to control the mechanical operation process without the need for refueling and cleaning. It is strictly prohibited to replace the spindle, pin, and angle of the culvert channel steel bending arch machine, and to adjust the parameters of the tunnel channel steel cold bending machine.

AfterSalesService :

• Culvert channel steel bending machine