Characteristics of precision hydraulic small pipe drilling machine for supporting grouting small pipe punching machine
Category:
mechanical equipment/Metal forming equipment/Metal forming equipment
Model:
JH-80CNC
Brand:
Jingheng
Retail Price
33,000.00USD
重量
kg
- Product Description
-
Description :
Characteristics of precision hydraulic small pipe drilling machine for supporting grouting small pipe punching machine
Punching machines have been widely used in tunnel construction. The punching machine can set 200 holes on one pipe, and the machine is matched with a servo motor. The hole spacing error is within ± 0.3mm, and the punching speed is fast, which greatly improves the manual cutting speed compared to before. The circular holes are also relatively neat and beautiful.
Installation method
It can be done by using a lead hole or direct insertion method.
Drill a hole with an electric drill, with a diameter 10-20mm larger than the diameter of the small conduit, and the depth of the hole depends on the length of the conduit.
If it is difficult to insert the catheter, a drill with a jacking function can be used to push the sleeve in.
Use a hair dryer to blow out any debris from the hole.
Wrap cotton yarn around the tail of the 4 small conduits to ensure that they are tightly attached to the borehole, and use cotton yarn to seal the gap tightly.
After the installation of the 5 small conduits, a certain area around them must be sealed with sprayed concrete. Spray thickness control within 5-8cm support grouting small pipe punching machine with precise hydraulic small pipe drilling machine characteristics.
Explanation of the operation process of the small tube punching machine:
1. Operators must understand the structure, performance, usage methods, and precautions of the equipment, carefully read the equipment manual before operation, and check the equipment circuit (forward rotation) and chassis oil level before operation. No debris is allowed on the equipment workbench, and no obstacles are allowed within the working range of the mold.
2. Prioritize entering manual mode when entering the main interface to conduct preliminary debugging of the device;
3. Set the punching diameter according to the requirements and replace the corresponding grinding tool core rod and chuck. When replacing the grinding tool core rod and chuck, two people work together to ensure that the installation is in place and accurate.
4. Set the required number of punching holes. Before installing the punching mold, the machine should be allowed to idle for 1-2 cycles according to the operating procedure. After confirming that the equipment is fine, use a clamping device to clamp the pipe, and then press the start button to allow the equipment to punch and support the pipe. The grouting small pipe punching machine has the characteristics of a precision hydraulic small pipe drilling machine.
AfterSalesService :
Key words:- Support grouting small pipe punching machine
