Tunnel channel steel bending machine, precision hydraulic I-beam cold bending machine, classification
Tunnel channel steel bending machine, precision hydraulic I-beam cold bending machine, classification

Tunnel channel steel bending machine, precision hydraulic I-beam cold bending machine, classification

Category:

mechanical equipment/Metal forming equipment/Metal forming equipment

Model:

WGJ-250

Brand:

Jingheng

Retail Price

22,000.00USD


重量

kg

  • Product Description
  • Description :

      Tunnel channel steel bending machine, precision hydraulic I-beam cold bending machine, classification

      Bending machines are now widely available in the market, capable of completing bending tasks for various types of steel such as channel steel, track steel, and round steel pipes. Different types of steel arches and arches with different angles require different grinding tools. The recognition of the bending machine in the market is very high now. Greatly improving the construction speed of profiles and saving labor for workers.

      What operating procedures should we pay attention to when using the I-beam bending machine

      1. When processing materials such as narrow sheets, the pressure should be appropriately reduced to avoid damage to the grinding tool.

      2. When processing, remember not to put your limbs in the mold room, and do not hold narrow materials with your hands. Processing one piece of material at a time cannot involve processing multiple pieces of material together.

      3. During the processing, pay attention to checking for any abnormal conditions in the hydraulic oil pump, oil, pipelines, etc.

      4. Sheet metal processing should be placed in the direction of the mold in China, and the machinery is not easy to operate unilaterally. This can improve machining accuracy. If the situation is unilateral processing, try to make the power less than 250kn.

      5. If any mechanical abnormalities are found, the machine should be stopped immediately for inspection.

      6. After processing, the system should be immediately pushed out and the power source should be cut off. Then, after cleaning and processing the garbage, the tunnel channel steel bending machine and the precision hydraulic I-beam cold bending machine are classified.

      In the processing of the I-beam bending machine, the I-beam bending machine requires the I-beam to walk slowly and steadily to avoid the easy to control bending of the I-beam due to excessive speed. The entire transmission system is installed on the base, and the transmission structure requires compactness and small external dimensions. Therefore, it is necessary to ensure a large transmission ratio, high transmission efficiency, good transmission stability and reliability, and a compact transmission system as a whole. Two stage reduction is a helical gear transmission with the above characteristics, which fully meets production requirements. I-shaped cold-formed steel mainly bears the rolling friction resistance of auxiliary system door brackets and the friction resistance of cold-formed rollers during walking. Through analysis, these two forces are relatively small, mainly due to the pressure transmitted by the cold forming rollers of the I-beam cold bending machine through the steel section. According to the analysis, the torque driving the roller is not very large, so the power of the driving motor is generally small. The Y series three-phase asynchronous AC motor can meet the requirements of the tunnel channel steel bending machine and the precision hydraulic I-beam cold bending machine classification.

    AfterSalesService :

    Key words:
    • Tunnel channel steel bending machine