Tunnel support small pipe punching machine with precise 360 degree rotation, specifications for small pipe punching machine
Category:
mechanical equipment/Metal forming equipment/Metal forming equipment
Model:
JH-80CNC
Brand:
Jingheng
Retail Price
33,000.00USD
重量
kg
- Product Description
-
Description :
Tunnel support small pipe punching machine with precise 360 degree rotation, specifications for small pipe punching machine
Punching machines have been widely used in tunnel construction. The punching machine can set 200 holes on one pipe, and the machine is matched with a servo motor. The hole spacing error is within ± 0.3mm, and the punching speed is fast, which greatly improves the manual cutting speed compared to before. The circular holes are also relatively neat and beautiful.

Before using the advanced small tube drilling machine:
1. Before using the small tube punching machine, it is necessary to check whether there are any residues on the punch, especially on the cutting edge and lower die, and not let any debris attach to the punch and lower die.
2. After inspection, an appropriate amount of lubricating oil should be added to the punch (i.e. the contact area between the punch and the guide sleeve), and the oil on the cutting edge should be wiped clean with a cloth to prevent residue from adhering to the cutting edge.
3. Suggested lubricants: Cloisonn é oil, pure engine oil, or butter for tunnel support small pipe punching machine with a precision 360 degree rotating small pipe punching machine specification.




Notes:
1. This machine should be properly grounded, preferably separately grounded;
2. The machine is not allowed to calibrate the mold during operation;
3. After 200 hours of operation, the cleanliness of the oil should be checked, and there should be no odor. Drop a drop of oil on a white filter paper overnight, and there should be no black stains within the center point of the oil stain. Otherwise, the oil should be replaced;
4. The hydraulic oil should be N46 anti-wear hydraulic oil or N46 low pour point hydraulic oil, filtered through an 80-100 mesh wire mesh before use. It is recommended to change the oil no more than two months after the next oil change, and then change the oil every six months thereafter. Jiangxi grouting small pipe drilling machine non-standard customization, quality priority.
5. Rivet pliers shall not be overloaded for use, and the pressure shall be strictly adjusted according to the provisions of Table 3;
6. If there is an accidental leakage in the hydraulic system, sufficient hydraulic oil should be replenished after clearing the fault;
7. Regularly check the cleanliness of the pump station oil tank, and strictly prohibit water, dust, and foreign objects from entering the oil fragrance;
8. If switching functions, the air inside the system should be completely purged before it can work;
9. If there are any abnormalities during testing and operation, the machine should be stopped immediately for inspection;
10. Maintain pressure for 10 minutes and allow for a pressure reduction of 2.5Mpa. Tunnel support small pipe punching machine with precision and 360 degree rotation. Specification for small pipe punching machine.
AfterSalesService :
Key words:- Tunnel support small pipe punching machine