Characteristics of advanced small pipe punching machine, precise and automatic small pipe drilling machine

Description :

　　Characteristics of advanced small pipe punching machine, precise and automatic small pipe drilling machine

　　Punching machines have been widely used in tunnel construction. The punching machine can set 200 holes on one pipe, and the machine is matched with a servo motor. The hole spacing error is within ± 0.3mm, and the punching speed is fast, which greatly improves the manual cutting speed compared to before. The circular holes are also relatively neat and beautiful.

　　The use of small conduits in the drilling machine originated from the construction of underground caverns using the New Austrian Method, and advanced small conduits are actually the development of advanced anchor rods. A steel pipe with a wall thickness of 5mm and a diameter of generally 42mm or 50mm, with varying lengths ranging from 2m to over ten meters. After the construction of the small pipe is completed, it is usually grouted to consolidate the rock, hence the term 'small pipe grouting'. From the construction effect, it can be seen that the advanced small conduit has the advantages of obvious initial support effect, good construction efficiency, and high performance. The application of advanced anchor rods is targeted at the surrounding rock where collapse is expected to occur. In our daily lives, many objects that require high-speed hydraulic punching machines are everywhere, such as doors and windows, which need to be punched. As an essential tool in woodworking machinery, high-speed hydraulic punching machines have gradually developed from simple mechanical production to advanced fields with computer control and electronic technology. They not only innovate high processing efficiency, but also make great contributions to the development of the high-speed hydraulic punching machine industry. This hydraulic high-speed punching machine is widely used for punching stainless steel (zinc steel, aluminum alloy, steel pipe, welded pipe, seamless pipe, square pipe, round pipe, flat iron, channel steel, angle iron) profiles, fan factories, air conditioning parts factories, antenna factories, shelf factories, metal furniture factories, automotive parts factories, construction material production enterprises and other hardware fittings and profiles. We can customize automated and semi automated equipment according to customer requirements, including advanced small pipe punching machines and high-precision fully automatic small pipe drilling machines.

　　Equipment installation and debugging:

　　This product is divided into two parts: a small pipe punching machine and a hydraulic control (pump station). It comes with an instruction manual, packing list, and accessories when it leaves the factory. After the product arrives at the factory, check the documents and attachments, etc. When lifting the product, fasten it firmly and pay attention to safety. The product should be installed in a dry and dust-free hard ground environment, connected to the hydraulic cylinder of the machine body and the high-pressure oil pipe controlled by the hydraulic system. The position and angle of the machine body should be adjusted, and filtered N46 anti-wear hydraulic oil or N46 low pour point hydraulic oil should be injected into the oil tank. The oil level should be at 2/3 of the level gauge scale, ahead of the characteristics of the small pipe punching machine and the fully automatic small pipe drilling machine.

AfterSalesService :

• Advanced small pipe punching machine