Price of Heilongjiang geomembrane climbing welding machine and tunnel electric climbing welding machine

Description :

　　Price of Heilongjiang geomembrane climbing welding machine and tunnel electric climbing welding machine

　　Especially for the sealing of both ends of large-diameter winding pipes with hollow walls, welding of pipe fittings, and repair of pipe damage, the applicable welding materials are thermoplastic plastics HDPE, PP, PVDF, especially PE can play its characteristics, but should not be applied to conductive plastics (PE-EL), otherwise it will cause conductivity short circuits in the machine. Changing different welding shoes can be applied to welding, splicing, welding, repairing, splicing, sealing of large-diameter plastic pipes and fittings, splicing and repairing of thickened plastic film materials and geomembranes. The hot air temperature is high, the temperature is stable, the motor power is large, the torque is large, the service life is long, the performance is stable, the whole machine is lightweight, and it is easy to hold. The machine has a large extrusion capacity and can weld welds exceeding 10mm. Different welding boots can be selected to be suitable for different types of welds. This machine is used on barrels and fittings in accordance with Part 4 of the DVS standard (German Welding Society). The technical parameters provided by the plastic extrusion welding factory include the main components and names of the hot air switch, temperature adjustment knob, hot air welding Y-shaped extrusion welding boots, air outlet, feed inlet, clamp, power plug placement bracket, drive motor speed adjustment knob, and handle.

　　The principle of the protective measures adopted by the specially developed climbing welding machine for leakage is that the climbing welding machine can be used normally without water. If water appears on the ground during the use of the climbing welding machine, it will trip as soon as it is used. Through the tripping protection, it tells everyone that there is leakage in the shell of the climbing welding machine equipment. If you want to solve this problem, just place a board at the bottom of the climbing welding machine mechanical equipment to use it normally. If there is a leakage in the climbing welding machine and the method of raising it does not work, and the fault phenomenon is different from the above, it is highly likely that the internal parts of the climbing welding machine have been damaged.

AfterSalesService :

• Geomembrane climbing welding machine