Tunnel 42 Small Pipe Tip Shrinking Machine Jingheng 42 Small Pipe Tip Shrinking Forming Machine Sales Base

Description :

　　Tunnel 42 Small Pipe Tip Shrinking Machine Jingheng 42 Small Pipe Tip Shrinking Forming Machine Sales Base

　　The small pipe taper machine plays a crucial role in the construction industry. A small conduit is an indispensable step in construction, as it can effectively penetrate into the wall. The pointed end at the front is relatively easy to penetrate, and the small holes on the steel pipe wall are added to enhance the strength of the surrounding rock. The small tube taper machine has a fast taper speed, and the taper of a pipe can be completed within one minute.

　　Equipment information of small catheter tip shrinking machine:

　　1. Place the machine on a flat surface and fix the equipment body with screws;

　　2. Connect the power input line, and use a 50 square meter copper wire with three cores for the tapered host. The heating furnace uses three low 50 square single core copper wires; (Power supply is 380V50HZ);

　　3. Inject 80% pure water (preferably soft water) into the cooling water tank, turn on the water pump, and check the circulation effect of the water circuit (not necessarily correct);

　　4. Connect the air circuit and use a 10mm diameter trachea to connect the air source to the two-piece AFL2000, with a pressure set to 0.2MPA;

　　5. Inject 20L of engine oil (for cooling the main components) into the lower mesh screen position in front of the shrinking machine;

　　6. No load trial operation: Start the power supply, turn on the air pump, start the main engine, start the heating furnace to wait for heating, step on the foot switch of the feeding mechanism, check whether the step time is correct and whether the step is smooth. Tunnel 42 small tube shrinking machine Jingheng 42 small tube shrinking forming machine sales base.

　　Daily maintenance of small catheter tip machine

　　1. The operator is responsible for maintaining the cleanliness and lubrication of the machine.

　　2. Ensure that the cooler is properly connected for the sake of machine operation and oil lifespan.

　　3. Keep the mold clean and frequently use compressed gas to blow and suck.

　　4. Pay attention to avoiding oil contamination, changes in oil quality, oil temperature, and oil level. Tunnel 42 Small Pipe Tip Shrinking Machine Jingheng 42 Small Pipe Tip Shrinking Forming Machine Sales Base (Oil Level Meter 2/3 or More)

AfterSalesService :

• Tunnel 42 small pipe taper machine