Pre support steel pipe taper machine Jingheng 50 small pipe taper forming machine manufacturer

Description :

　　Pre support steel pipe taper machine Jingheng 50 small pipe taper forming machine manufacturer

　　The small pipe taper machine plays a crucial role in the construction industry. A small conduit is an indispensable step in construction, as it can effectively penetrate into the wall. The pointed end at the front is relatively easy to penetrate, and the small holes on the steel pipe wall are added to enhance the strength of the surrounding rock. The small tube taper machine has a fast taper speed, and the taper of a pipe can be completed within one minute.

　　Introduction to the characteristics of the small catheter tip shrinking machine: 1. Simple structure, easy to use, excellent manufacturing, lightweight and beautiful appearance. 2. No need for welding, material saving, and good performance in repeated assembly and disassembly. Therefore, the sleeve type pipe joint is increasingly widely used in oil installation requirements: the pre tightened pipe end face should be flat and the cut should be deburred. 3. Maintain the coaxiality between the pipe and the joint. 4. The pre tightening force should not be too large, and the blade should be just embedded in the outer wall of the pipe to avoid lateral force on the pipe. Small Pipe Punching Machine Tunnel specific Small Pipe CNC Punching Machine Tip Machine Paired with High Frequency Heating Series Detailed Description: The main features of the small pipe tip machine are: 1. Microcomputer fully digital, integrated control circuit, strong anti-interference ability, and low failure rate. 2. Adopting a sweep frequency zero voltage soft start circuit, the success rate of starting is 100%. 3. Voltage and current dual closed-loop control system ensures stable and reliable operation of the small catheter tip machine. 4. Frequency automatic tracking circuit, automatic adjustment of load impedance matching, achieving constant power output with a power factor of over 95%. 5. Wide frequency design, available for 200-10000HZ power supply selection. 6. A comprehensive protection system for overcurrent, overvoltage, phase loss, undervoltage, and inverter failure ensures that the small tube tip machine does not damage any components in the event of a malfunction. 7. Rich external control interfaces, convenient for closed-loop adjustment of power supply, workpiece temperature, pre support steel pipe shrinking machine, precision constant 50 small pipe shrinking forming machine manufacturer

　　Generally, seamless steel pipes with a diameter of 38-50mm are used for production. A conical shape of about 10cm is made at the front end of the small conduit, and steel hoops with a diameter of 6-8mm are welded at the tail end. No holes shall be opened within 100cm from the rear end, and the remaining part shall be arranged with 6mm diameter overflow holes in a plum blossom shape of 20-30cm. The specific pipe diameter design drawing includes. Its main function is to provide pre support for weak and fractured zones, shallow buried sections, tunnel entrance biased sections, sand layers, sand and gravel sections, fault fracture zones, and other sections during the self stabilization period. Because it is driven before excavation in this construction section and located in front of the construction surface, it is called a super front small pipe pre support steel pipe shrinking machine and a precision constant 50 small pipe shrinking forming machine manufacturer.

AfterSalesService :

• Pre support steel pipe taper machine