Manufacturer of one to two double hopper lifting type spraying machine, Jingheng automatic feeding spraying unit

Description :

　　Manufacturer of one to two double hopper lifting type spraying machine, Jingheng automatic feeding spraying unit

　　The lifting and spraying machine improves work efficiency, without stopping the machine, and can work continuously. The hopper automatically loads materials, saving manual labor. The size of the machine can be selected according to the construction environment to facilitate construction and increase workload. In terms of machine operation, it is also very user-friendly. The machine can start working as soon as it arrives, and everyone can operate it.

　　Worker acceptance level: The operating environment of the dry spraying machine is poor and has a significant impact on the body. However, during the operation, the dry powder material is not added with water and there is a combination of air pressure, so the work intensity is not too high. Generally, one worker can spray the slurry; Wet spraying machine is used to directly transport materials in tank trucks. The slurry is heavily mixed with water, and spraying requires two to three people to operate, resulting in high labor intensity. The dry spray machine can be used normally without the need for regular replacement of rubber plates and rubber vulnerable parts; Due to the corrosive nature of some additives and fast solidification speed, the wet spray machine must be cleaned in a timely manner after each use to remove the materials from the wet spray machine and spray pipe. Otherwise, it may cause pipe blockage and require regular replacement of filter elements and maintenance. For operators who are accustomed to dry spray operations, it is a bit difficult to receive. The concrete spraying truck creatively connects the mature chassis manufacturing with the spraying truck, improving the off-road performance of the spraying truck and enabling fast and flexible transition operations. Its high speed of up to 75km and extremely strong maneuverability make it not only suitable for general spraying operation requirements, but also more suitable for engineering emergency construction. It is a manufacturer of one to two double hopper lifting spraying machine and precise automatic feeding spraying unit.

　　When spraying concrete, all operators must wear safety helmets, dust masks, dust-proof work displays, rain boots, and rubber gloves. The spraying operation area should have good ventilation measures, and the dust concentration in the operation area should not exceed 10mg/m3. Operators should avoid direct contact with alkaline liquid accelerators, and immediately rinse with clean water after accidental contact. The spraying operator should control the air pressure and spraying distance to avoid injury caused by rebound aggregates. The wire sheath should be intact, and the switch should be installed in a fixed switch box. The safety officer should inspect geological changes at any time and immediately evacuate the working face if loose sliding blocks are found. After the spraying is completed, the spraying machine and pipelines should be cleaned to avoid pipe blockage, explosion and injury. Before construction, the dangerous rocks in the support work area must be carefully inspected and dealt with. Construction equipment should be arranged in a safe zone, and the construction work platform should be safe and reliable, and safety railings should be set up. The power lines and electrical mail of the equipment must be checked regularly to ensure electrical safety. During construction, the wear of the feeding pipes and press heads should be checked regularly, and any wear, breakdown or loosening should be dealt with in a timely manner. When repairing machinery or equipment during construction, it must be carried out under the conditions of power outage and wind shutdown. After the maintenance is completed, relevant personnel must be notified in advance before supplying power and air to the mechanical equipment. When using increased air pressure to deal with pipe blockage accidents, the feeding pipe should be turned off first, the nozzle should be straightened, and no one should stand in front of the nozzle. The air pressure for clearing the pipeline should not exceed 0.5Mpa. Non construction personnel are not allowed to enter the work area where mouth spraying is being carried out. It is strictly prohibited to stand before spraying coffee during construction. The manufacturer of the Jingheng automatic feeding spraying unit of the lifting type spraying machine with one trailer and two double material buckets is strictly prohibited.

AfterSalesService :

• One trailer two double hopper lifting type spraying machine