Slope support hoisting type spraying machine, precise and constant foundation pit support spraying unit

Description :

　　Slope support hoisting type spraying machine, precise and constant foundation pit support spraying unit

　　The lifting and spraying machine improves work efficiency, without stopping the machine, and can work continuously. The hopper automatically loads materials, saving manual labor. The size of the machine can be selected according to the construction environment to facilitate construction and increase workload. In terms of machine operation, it is also very user-friendly. The machine can start working as soon as it arrives, and everyone can operate it.

　　Product Introduction

　　Lifting type spraying truck, also known as lifting type automatic feeding spraying truck, lifting type automatic feeding spraying unit. The lifting type spraying unit is a type of combined automatic feeding spraying unit, which can work for two spraying machines at the same time. The lifting type spraying unit can be widely used in the construction of large collapse tunnels, with the characteristics of high efficiency and humanization, replacing the traditional manual feeding construction mode, saving labor to the maximum extent, avoiding the harm of manual feeding dust to construction personnel, and avoiding waste caused by material residue on the uncured working surface during manual feeding. This product has multiple national patents, advanced technology, complete functions, simple operation, convenient maintenance, no vulnerable parts, and can greatly reduce construction costs. It is a slope support hoisting type spraying machine and a precise foundation pit support spraying unit.

　　The spraying operation process and precautions of the lifting one to two automatic feeding and spraying unit

　　1. Move the lifting one to two automatic feeding and spraying unit to the vicinity of the spraying operation surface, connect it to a three-phase 380 volt power supply, and observe whether the voltage displayed on the voltmeter on the control board of the electrical control box is around 380 volts. If the voltage is lower than 360 volts, it is strictly prohibited to turn it on, otherwise the machine will not work properly due to low voltage. Pour an appropriate amount of rapid setting agent into the rapid setting agent addition device, connect the air duct, everything is ready, and prepare for spraying.

　　2. The transport vehicle pours concrete materials directly into the flipping bucket through the feeding support. The concrete material is a wet sprayed material, and its moisture content should not exceed 0.2, otherwise it will affect the discharge port.

　　3. Press the oil pump switch, the oil cylinder fixed on the bracket will flip the tipping bucket up, pour the material into the upper storage hopper, turn off the oil pump motor, and lower the tipping bucket. The falling speed can be controlled by the position of the valve control lever. When the control lever is located below *, the speed is * fast.

　　4. Turn on the switch of the spraying machine and start spraying according to the spraying requirements.

　　5. When the material in the hopper of the sprayer is lower than the screen mesh, jog the vibration motor switch of the upper storage hopper to control the discharge.

　　6. When the material in the upper storage hopper is almost used up, repeat the above operation to complete a cycle.

　　7. When there is too much accumulation of large particles on the sieve in the hopper of the sprayer, the particles should be cleaned up in a timely manner.

　　8. Attention: It is strictly prohibited to move the one to two automatic feeding and spraying unit when lifting materials. When the flipping bucket is lifted, it is strictly prohibited to stand under the flipping bucket. If it is necessary to stand due to special circumstances, mechanical means should be used to limit the falling of the flipping bucket, slope support, lifting type spraying machine, and precise foundation pit support spraying unit.

AfterSalesService :

• Slope support hoisting type spraying machine