Shanghai Steel Skeleton Lightweight Plate DWB7015-1-2 at Shenbo Price
Category:
building materials/Waterproof and fireproof functional materials/insulation material
Model:
19CG12/19CJ20
Brand:
Shen Bo
model:
19CG12/19CJ20
material:
Cement foaming
Soft and hard conditions:
hard
Retail Price
120.00USD
重量
kg
- Product Description
-
model 19CG12/19CJ20
material Cement foaming
Soft and hard conditions hard
Description :
Shanghai Steel Skeleton Lightweight Plate DWB7015-1-2 produced by Hebei Shenbo Building Materials Co., Ltd. is a lightweight plate that is conducive to earthquake resistance. With reasonable seismic node design, it can meet the seismic fortification intensity requirement of 8 degrees. And during an earthquake, the secondary damage caused by the sheet metal is minimal, making it an ideal component material for buildings in earthquake prone areas.
The combination structure of inorganic lightweight core materials, although it is a lightweight slab, maintains the characteristics of high bearing capacity and high safety of traditional reinforced concrete heavy-duty slabs. It can meet the requirements of uniformly distributed loads and has strong concentrated bearing capacity, making it an ideal material to replace traditional concrete roof panels and floor slabs.
The carefully designed combination of material selection and construction methods ensures that the product design service life can reach
year
The core plate is made of inorganic material, with good stability, aging resistance and service life equal to that of concrete material
Diameter of steel wire at the bottom of the board
Above, the thickness of the protective layer
Above and with a moisture absorption rate lower than
The board has strong resistance to gas corrosion such as acid and alkali
After the second freeze-thaw cycle, there was almost no change in volume and strength.
The board has excellent insulation performance, low thermal conductivity, and the overall heat transfer coefficient of the board can reach
Meet the insulation and energy-saving requirements of buildings in high-altitude regions
The board has excellent thermal insulation performance, and the outer side of the board is heated to
At that time, the temperature inside the board was only
It is an ideal building insulation material for high-temperature areas.
Waterproof:
The core board is made of inorganic material, which is non combustible and does not burst or release toxic gases in fire, making it an excellent refractory material; The fire resistance of the entire board is greater than
Hours, meeting the first level fire protection requirements of the components. The steel frame lightweight plate comes with a dedicated one when it leaves the factory
The composite anti-seepage coating, combined with the overall waterproofing method of the roof, forms a reliable composite waterproofing system, solving the problem of leakage of general lightweight boards.
explosion venting
Can meet the requirements of special building roofs and walls that are prone to explosion and fragility. Experimental results have shown that the lightweight steel frame of the medium steel frame will be retained on the main structure of the building, while the core material will be instantly crushed, achieving the purpose of explosion venting without causing secondary damage.
earthquake resistance
：
Average sound insulation of the board
Above, it meets the sound insulation requirements of high-level acoustic buildings such as studios. Steel skeleton lightweight panels belong to lightweight panels that are conducive to earthquake resistance. With reasonable seismic node design, they can meet the requirements of
Requirements for seismic fortification intensity. And during an earthquake, the secondary damage caused by the sheet metal is minimal, making it an ideal component material for buildings in earthquake prone areas.
AfterSalesService :
Key words:- Steel skeleton lightweight plate
More Products
