KST board Hunan Changde KST board 15CJ63 composite board customization
Category:
building materials/Waterproof and fireproof functional materials/insulation material
Model:
15CJ63
Brand:
Shen Bo
model:
15CJ63
material:
Cement foaming
Soft and hard conditions:
hard
Retail Price
160.00USD
重量
kg
- Product Description
-
model 15CJ63
material Cement foaming
Soft and hard conditions hard
Description :
KST board Hunan Changde KST board 15CJ63 composite board customization
Using a dedicated waterproof and wear-resistant coating as the built-in waterproof layer on the surface of the board, and various other waterproof methods can be added as needed to form a composite waterproof system with multiple defenses.
Under standard load, it has a fire resistance of 2 hours, does not explode during combustion, does not release any toxic gases, has no odor, and no smoke. It has excellent fire resistance performance and meets the environmental protection requirements of modern buildings. In the fire prevention experiment, when the bottom of the board is baked at a high temperature of 900 ℃, the temperature of the back of the board is only 50 ℃, indicating excellent thermal insulation performance.
Lightweight panels are beneficial for building seismic resistance, and with reasonable seismic connection methods for panels, they can meet the seismic fortification intensity requirements of 8 degrees. And when an earthquake occurs, the secondary damage caused by the board is minimal.
Sound insulation: Due to the high closed cell rate of the microporous structure inside the core material of the board, the average sound insulation is 40dB, which has excellent sound insulation effect.
The steel skeleton lightweight plate is composed of a special structure and can be used as a pressure relief plate for buildings. When it occurs, the core material of the plate will instantly absorb and release energy, crush and be restrained, without causing secondary damage.
The materials used for the steel skeleton lightweight board do not contain any harmful gases or radioactive substances such as ammonia and TVOC, and do not use paint, adhesives, or other materials. It belongs to green, environmentally friendly, and healthy products.
The board specifications are customized according to the characteristics of the building, and there is no need to lay purlins during use. The board can be perforated, equipped with light shields, roof pipes, fans, etc.
No special maintenance is required during normal use, and the cost of use is low. When there is partial damage, it can be directly repaired on the roof. If it is necessary to replace the board, it can also be replaced with a single board without affecting the overall structure.
The use of steel skeleton lightweight plates can significantly save the amount of steel used in the support system, shorten the construction period, and achieve significant comprehensive economic benefits.
Steel skeleton lightweight plate
The main product is steel skeleton light plate, also known in the industry, steel frame light composite plate, which is a light plate made of structural load-bearing steel and steel mesh, with foam concrete (or eps plate filled on this basis) as the core material, and integrates the functions of load-bearing, heat preservation, fire prevention, explosion relief, sound insulation, etc.
The light roof panel of the building is composed of a load-bearing skeleton formed by the mutual connection of profile steel members and reinforcement mesh, and then poured with building type (jx) inorganic composite reinforced foam concrete. The upper and lower layers are set with high-strength crack resistant fibers, and then laid with waterproof and crack resistant cement base to form a waterproof water surface, so as to meet the requirements of roof surface bearing, thermal insulation, fire prevention, waterproof, etc.
Product Features
Steel skeleton lightweight slab with high strength and lightweight - unique jx lightweight high-strength core material, 320-420 kg/m3, effectively controlling the self weight of the slab within 0.45-0.74 kn/m2, allowing external loads ≥ 1.0 kn/m2.
2. The construction and installation are convenient and flexible. The plates without steel frames can be planed, sawed, nailed, etc., and can be used in conjunction with any structural system. The plate with steel frame can minimize its own weight, significantly reduce the load on the main structure of the building, reduce the overall cost of the building, and shorten the construction period while ensuring that the plate can meet the requirements of large span and high load. Simultaneously increase the usable area by 8-10%.
AfterSalesService :
Key words:- KST board
More Products
