GRG Ceiling Installation Precautions: Decorative Grade GRG Manufacturer Tells You

Description :

　　With the improvement of people's living standards nowadays, they have begun to pay more and more attention to the decoration of houses.GRG CeilingI believe everyone is familiar with GRG ceiling materials, as they have become increasingly common in modern homes. However, there are some details to pay attention to during the installation process of these materials, such as:

　　1: To ensure the flatness of the large area of the suspended ceiling, the installation personnel must position and lay out according to the design drawings, determine the elevation and accuracy, pay attention to the relationship between the GRG suspended ceiling position and the pipeline, and correspond vertically to prevent the contradiction of overlapping elevation between the suspended ceiling position and various pipeline equipment. This contradiction should be resolved in advance through retesting. Install on site according to the construction drawings and record the number and inspection status identification of each material in the floor plan.

　　2: Carefully inspect the condition of the ceiling points, and for heavy-duty ceilings with additional loads (such as pedestrian ceilings), there must be safe and reliable fastening measures for the suspension points. For pre embedded iron parts, pre embedded hanging bars, or pre welded steel plates, they should be reserved in place by the civil construction unit according to the design specifications. For reinforced concrete floor slabs without pre embedded components, when using methods such as nail shooting, expansion bolts, and adding angle steel blocks to handle suspension points, they must meet the load-bearing requirements of the suspended ceiling project and be designed through calculation and testing.

　　3: Bullet line determinationGRG CeilingThe position of the suspended ceiling steel frame is accurate, that is, the suspension rods are vertical, and the force on each suspension rod is balanced to avoid large areas of unevenness in the ceiling.

　　4: Installing a large areaGRG CeilingBefore installing decorative panels, it is necessary to wait until the piping equipment on the ceiling is set up, such as the electrical pipes on the ceiling and the pedestrian or installation channels inside the ceiling; After the installation and pressure testing of fire pipes are completed and confirmed by relevant departments, the ceiling decoration panel can be sealed. Ceiling lighting fixtures, sealing sprays, smoke detectors, etc. must be horizontal and vertical. Before opening, the wiring should be laid out first, and after overall coordination, holes should be opened for installation.

　　5: To ensure the overall rigidity of the GRG ceiling and prevent future deformation of the ceiling, it is recommended to install the shaped GRG ceiling first, which is beneficial for the positioning of the ceiling design. Beneficial for its mutual fixation with other suspended ceilings. The ceiling design is made of light steel materials to ensure sufficient rigidity.

AfterSalesService :

• GRG Ceiling