Introduction to GRG components imitating wood grain by Guangdong GRG manufacturer, Shangpin Decoration, with specific operation methods

Description :

　　As is well known,GRG componentsIt is a necessary material for realizing various architectural arts, and designers rely on GRG products to present their imaginative artistic inspiration. The infinite plasticity of its shape and the colorful surface color make it increasingly used in shopping malls and hotels. The following is an introduction to the production process of GRG component wood grain veneer by the manufacturer of Shangpin Decoration:

　　1、 Materials and tools: GRG components (with a surface specification of 600mm * 300mm curved board with flanging), wood grain paper, adhesive, scraper, brush, knife, and clean cotton cloth.

　　2、 First, proceedGRG componentsThe surface treatment requires a standard of flatness, smoothness, and cleanliness. After the processing is completed, attach the wood grain paper to the surface of the GRG component for observation, in order to cut off excess parts and cut them to the appropriate size. Key points of this step: The cut wood grain paper should be slightly larger than the surface of the GRG component.

　　3、 Remove the wood grain paper and use a pre prepared brush to evenly apply the adhesive onto the surface of the GRG component. Key points of this step: The adhesive should be uniform and there should be no clumping or accumulation.

　　4、 Cover the cut wood grain paper on the surface of the GRG component and observe the areas with wrinkles. Apply force and flatten it. The key points of this step: When pasting wood grain paper, pay attention to the wrinkles of the decorative patterns on the surface. Visible wrinkles must be treated; When dealing with wrinkles, pay attention to the strength and avoid applying too little or too much force.

　　5、 Gently wipe the surface of the wood grain paper repeatedly with a clean cotton cloth to clean any small particle impurities that may appear. Key points of this step: Cleaning the surface of wood grain paper is to avoid small sand particles and other hard particles that may cause damage to the wood grain paper in the next step.

　　6、 Use a scraper to repeatedly apply pressure and scrape off excess adhesive. Key points of this step: Carefully observe the surface, and any adhesive buildup must be scraped off.

　　7、 Use a small knife to cut off the excess wood grain paper at the edge of the GRG component. Key points of this step: The selected tool must be sharp to avoid the occurrence of burrs during cutting.

　　8、 Drying can be done naturally during high temperatures in summer. Alternatively, a heat lamp or oven can be used to accelerate the drying of adhesive.

　　9、 Surface paint, GRG components treated with surface paint will have a very good wood grain visual texture. Key points of this step: Brushing the surface paint should be done 3-4 times to achieve the desired visual effect.

GRG componentsAfter surface painting treatment, the wood grain finish can achieve a certain mirror effect. The GRG components of Shangpin Jewelry are made of self-developed GRG base materials, which have low cost and high quality, and are highly popular in the market. In addition, Shangpin Decoration provides installation guidance for GRG components according to customer needs, or directly dispatches our experienced GRG component installation team to carry out construction, ensuring worry free installation for customers.

AfterSalesService :

• GRG components