Online chloride ion analyzer with arbitrary hysteresis setting and large measurement range

Description :

　　Online chloride ion analyzer

　　wide measurement range

　　1. Online chloride ion analyzerProduct Configuration

　　Please confirm if the packaging box of the detector you purchased is complete. If there is any damage to the packaging or shortage of any accessories, please contact the dealer as soon as possible. The configuration is as follows:

　　Standard Configuration

　　◇ One instrument

　　◇ One chloride ion electrode (5-meter)

　　◇ Tighten two locking strips

　　◇ One user manual

　　◇ Product Qualification Certificate

　　optional

　　◇ 485 communication interface and 485 to 232 or 485 to USB connector

　　Chloride ion detector

　　2. Product Introduction of Online Chloride Ion Analyzer

　　The chloride ion online measurement and control instrument adopts the imported chloride ion selective electrode method (ISE method), which has high sensitivity, rapid signal response, accurate measurement, stable performance, and simple maintenance. This measurement and control system has the characteristics of easy use, high accuracy, and economy. Using this series of analytical techniques to ensure the stability, reliability, and accuracy of the instrument's long-term operation. It has functions such as Chinese menu operation and 485 communication.

　　Used for continuous monitoring and control of chloride ion content in water solutions in drinking water treatment plants, canning plants, drinking water, swimming pools, cooling circulating water, water quality treatment projects, etc.

　　Key Features:

　　◇ Large screen dot matrix LCD display, Chinese menu operation.

　　Simultaneous display of multiple parameters: chloride ion value, temperature, output current, etc. are displayed simultaneously, which is intuitive and easy to read, and there is a range overrun prompt.

　　◇ There is a function to restore factory settings.

　　◇ Manual/automatic temperature compensation function.

　　Communication function (optional): Equipped with RS-485 communication interface (partially compatible with MODBUS protocol), the chloride ion value corresponding to 4-20 mA current output can be set arbitrarily.

　　◇ Optoelectronic isolation 4-20mA current output.

　　◇ The function of setting the hysteresis value arbitrarily avoids frequent actions of the switch relay, and has the function of setting the switch value to turn off and off.

　　Watchdog function: Ensure that the instrument panel does not crash.

　　◇ Power failure protection>10 years.

　　24-hour monitoring

　　3. Technical indicators of online chloride ion analyzer

　　1. Measurement range: Chloride ion: 0-20000 mg/L (ppm), temperature: 0-60 ℃

　　2. Resolution: 0.01mg/L, 0.1 ℃

　　3. Accuracy: better than ± 3%, ± 0.5 ℃

　　4. Manual/automatic temperature compensation function (0-60 ℃).

　　5. Control interface: Two sets of ON/OFF relay contacts, divided into high and low point alarm signal photoelectric isolation outputs. The third group of relays: automatic cleaning control function analog output.

　　6. Signal isolation output: Optocoupler isolation protection 4-20mA signal output.

　　7. Relay: The hysteresis of the relay can be set arbitrarily, and the relay load is 3A 220VAC/24VDC.

　　8. Working conditions: ambient temperature of 0-60 ℃, relative humidity ≤ 90%

　　9. Output load: load<500 Ω (0-10mA), load<750 Ω (4-20mA)

　　10. Working voltage: 220VAC ± 10%, 50/60Hz

　　11. Size: 96 × 96 × 156 mm

　　12. Hole size: 91 × 91mm

　　13. Weight: 0.9Kg

　　14. Protection level: IP65

　　Water Quality Monitor

AfterSalesService :

• Online chloride ion analyzer