24-hour real-time monitoring of online salinity meter, environmentally friendly networked water quality salinity analysis and detection instrument

Description :

　　Online salinometer

　　 24-hour real-time monitoring

　　one.Product Configuration

　　Please confirm if the packaging box of the detector you purchased is complete. If there is any packaging damage or shortage of any accessories, please contact the dealer as soon as possible. The configuration is as follows.

　　Standard Configuration

　　◇ One salinity meter

　　◇ Tighten two locking strips

　　◇ One user manual

　　◇ One electrode

　　◇ Product Qualification Certificate

　　Optional attachments

　　◇ Electrode installation bracket

　　◇ Electrode flow cup

　　This product is an online intelligent salinity meter independently developed by our company. Using high-performance CPU chips and SMT surface mount technology to measure salinity and temperature, temperature compensation, high accuracy, and good repeatability. It can be widely used for continuous monitoring of salinity values in solutions such as aquaculture, chemical fertilizers, marine, environmental protection, pharmaceuticals, biochemistry, and food.

　　Environmentally friendly networking

　　2. Main features:

　　◇ Large screen dot matrix LCD display, Chinese menu operation.

　　◇ Can measure salinity and control upper and lower limits.

　　◇ The screen displays the alarm status and can be accompanied by ON/OFF signal output at the same time.

　　◇ Automatic temperature compensation function: automatic 0-100 ℃.

　　Communication function (optional): Equipped with RS-485 communication interface (partially compatible with MODBUS protocol), the salinity value corresponding to 4-20 mA current output can be set arbitrarily.

　　Watchdog function: Ensure that the instrument panel does not crash.

　　◇ Factory settings can be restored. Power failure protection>10 years.

　　-1-

　　Water quality and salinity analyzer

　　3. Technical indicators

　　1. Salinity measurement range: 0-100 ‰

　　2. Resolution: 0.1 ‰

　　3. Accuracy: ± 2.0% (FS)

　　4. Automatic temperature compensation: 0~100 ℃ Temperature compensation: NTC 10K, based on 25 ℃, temperature compensation coefficient can be adjusted

　　5. Control interface: Two sets of ON/OFF relay contacts (passive ports), divided into salinity and temperature control signal photoelectric isolation outputs.

　　6. Signal isolation output: Optocoupler isolation protection 4-20mA signal output

　　7. Relay: Relay hysteresis can be set arbitrarily, relay load 10A 220VAC

　　8. Working conditions: ambient temperature of 0-60 ℃, relative humidity ≤ 90%

　　9. Output load: Load ＜ 750 Ω (4-20mA)

　　10. Working voltage: 220VAC ± 10%, 50/60Hz

　　11. Size: 96 × 96 × 115mm

　　12. Hole size: 92 × 92mm

　　13. Weight: 0.8Kg

　　Salinity detector

AfterSalesService :

• Online salinometer