Real time monitoring of conductivity indicators in water using an online conductivity detector. Conductivity testing analyzer

Description :

　　Online conductivity detector

　　SZ-DDL online TDS/conductivity meter 2-in-1 monitoring instrument, warm reminder

　　Select appropriate electrodes and installation methods based on the environment.

　　You can apply for our company's existing online collection software for the upper computer for free, while other functional software needs to be ordered.

　　24-hour real-time monitoring

　　1. Product configuration

　　Please confirm if the packaging box of the detector you purchased is complete. If there is any packaging damage or shortage of any accessories, please contact the responsible person as soon as possible. The configuration is as follows.

　　Standard Configuration

　　◇ One instrument

　　◇ Tighten two locking strips

　　◇ One user manual

　　Optional attachments

　　◇ Electrode installation bracket

　　◇ Electrode flow cup

　　◇ Constant 0.01 electrode; 0.1 electrode; 1.0 Electrode; 10 electrodes.

　　◇ AC 220V power cord

　　Waterproof, dustproof, moisture-proof shell

　　2. Product Introduction

　　Key Features:

　　◇ New waterproof, dustproof, and moisture-proof shell (IP65) technology, surface painting technology, and elegant appearance of the instrument.

　　The product has strong anti-interference ability.

　　◇ Large screen dot matrix LCD display, supports switching between Chinese and English menus, and displays multiple parameters simultaneously.

　　◇ It can measure conductivity/TDS, control upper and lower limits, and automatically switch ranges to improve the measurement resolution of the product.

　　◇ The screen displays the alarm status and can be accompanied by ON/OFF signal output at the same time.

　　◇ Automatic temperature compensation function: automatic 0-100 ℃.

　　Communication function: Both RS485 and 4-20mA interfaces use optoelectronic isolation technology. The RS-485 communication interface is compatible with the MODBUS protocol (optional) and can be converted to RS-232. The conductivity/TDS value corresponding to the 4-20 mA current output can be set arbitrarily. Support internal IoT and customized IoT for customers.

　　◇ Function of setting hysteresis arbitrarily to avoid frequent operation of switch relays.

　　◇ Can be customized in large quantities (within 0-300 mS · cm-1)

　　Watchdog function: Ensure that the instrument panel does not crash.

　　◇ Factory settings can be restored. Power failure protection>10 years.

　　Optoelectronic isolation technology

　　3. Technical indicators

　　◇ Conductivity measurement range:

　　0.01 electrode 0-20.00 μ S · cm-1

　　0.1 electrode 0-200.0 μ S · cm-1

　　1.0 Electrode 0-2000 μ S · cm-1

　　10.0 electrode 0-20.00 mS · cm-1 (customized for other ranges, such as 0-300 mS · cm-1)

　　◇ TDS range:

　　0.01 electrode 0-10ppm

　　0.1 electrode 0-100pm

　　1.0 Electrode 0-1000ppm

　　10.0 electrode 0-10000ppm (customized for other ranges)

　　◇ Resolution: 0.01 μ S · cm-1, 0.1 μ S · cm-1, 0.001 mS · cm-1, 0.01 mS · cm-1

　　Accuracy: 2.0% (FS)

　　◇ Automatic temperature compensation: 0-100 ℃ Temperature compensation: NTC10k, based on 25 ℃, temperature compensation coefficient can be adjusted

　　Control interface: Two sets of ON/OFF relay contacts (passive ports), divided into conductivity/TDS, temperature control signal photoelectric isolation output

　　◇ Automatic cleaning interface: a set of automatic cleaning control points, cleaning time 0-9999 seconds, interval time 0-9999 minutes

　　4-20mA current output: One current output, photoelectric isolation protection, improves anti-interference ability

　　◇ 485 interface: Optoelectronic isolation output, supports IoT, (partially compatible with MODBUS protocol)

　　◇ Relay: Relay hysteresis can be set arbitrarily, relay load 3A 220VAC

　　◇ Working conditions: The ambient temperature is 0-60 ℃, and the relative humidity is ≤ 90%

　　◇ Output load: Load ＜ 750 Ω (4-20mA)

　　◇ Working voltage: 220VAC ± 10%, 50/60Hz

　　◇ Size: 96 × 96 × 168 mm

　　◇ Hole size: 92 × 92mm

　　Weight: 0.9Kg

　　◇ Protection level: IP65

　　Water Quality Tester

AfterSalesService :

• Online conductivity detector