Supply MSE100 same silicone resin solvent-free silicone resin corresponding to Wacker resin

Description :

Supply MSE100 same silicone resin solvent-free silicone resin corresponding to Wacker resin

　　MSE 100 Liquid Methyl Polysiloxane

　　Product description

　　MSE 100 is a liquid polysiloxane containing methyl and methoxy functional groups.

　　nature

　　MSE 100 is recommended as a base material for high-temperature resistant coatings under ambient temperature and moisture curing conditions. Used in conjunction with suitable heat stable pigments and fillers, SILRES® MSE100 is the preferred choice for room temperature curing materials. The curing speed depends on the choice of catalyst and the relative humidity of the environment. After application, drying, and baking, SILRES® is added; MSE100 coating can withstand up to 650 ℃ (1200 ℉) while maintaining adhesion.

　　feature

　　Low viscosity liquid, solvent-free organic silicon base material (solvent<2%) with very high inorganic content (68-72% silica)

　　Can cure at room temperature within 15 minutes with almost no smoke generated during the initial heating process, limited compatibility (suitable as a base material)

　　Application:

　　MSE 100 can be applied to various coatings that tend to cure at room temperature first, with a heat resistance range between 200 ℃ (400 ℉) and 650 ℃ (1200 ℉). In many applications, its purpose is to provide anti-corrosion performance for steel or aluminum materials. If zinc rich ethyl silicate is chosen as the primer, its corrosion resistance can be further enhanced. The upper limit of heat resistance depends on the coating formula, especially the pigments used. The use of silver aluminum powder pigment can withstand temperatures up to 650 ℃ (1200 ℉), while the use of black pigment can withstand temperatures up to 500 ℃ (930 ℉). Other pigments

　　Each material also has its own upper limit of heat resistance. -Cars, motorcycles, and aircraft (such as exhaust pipes, mufflers, engine components, etc.)

　　-Industrial coatings (such as chimneys, boilers, gas stoves, heat exchangers, electric lights, etc.)

　　-Home appliances (such as ovens, fireplaces, barbecue grills, etc.)

　　The heat-resistant coating based on MSE100 can be used as a single component,

　　It can also be used as a two-component system. Once a catalyst is added to a single component system, it is highly sensitive to moisture. Generally speaking, pigments, fillers (mica powder or talc powder), anti settling additives

　　Catalyst, other solvents (depending on necessity), together with SILRES® MSE100 is mixed and stirred. During research and production, it is necessary to carefully check the storage stability of the product.

　　A two-component system can provide a longer storage period. Component A: pigment, filler mica powder or talc powder, (anti settling) additive

　　Other solvents (depending on necessity) and SILRES® MSE100 is stirred and dispersed together.

　　Component B: Contains catalyst and other solvents (depending on necessity).

　　Mix the two components evenly before use.

　　Suitable catalysts include acids and bases, tin, zinc, titanium, and zirconium compounds, etc. The recommended catalyst is alkyl titanate, such as n-butyl titanate. The adhesion and corrosion resistance of the material need to be strengthened through the use of layered pigments and fillers. The guidance formula can be requested as needed. In addition to high temperature resistance, when the zinc rich primer is wrapped with a layer of SILRES

　　® Organic silicon high-temperature resistant resin can also achieve excellent corrosion resistance.

　　Basic operation guide:

　　-Surface treatment: It is strongly recommended to sandblast and wash off the surface with an appropriate solvent beforehand

　　grease stain

　　-It can be operated through spraying, dipping, brushing, and other methods

　　-Provide sufficient ventilation environment to ensure that the concentration of particles and vapors is lower than occupational hazards

　　Exposure limit

　　-At room temperature and relative humidity of 50%, the surface drying time is generally around 30 minutes

　　-Recommended dry film thickness is 15-25 μ m

　　store

　　SILRES® MSE 100 must be stored in a sealed original container to isolate moisture. Contact with tin (such as unsuitable metal containers) or moisture

　　Touching can cause gelatinization. At the same time, the "expiration date" of the product will be indicated on the label of each batch of products.

　　Storing beyond the expiration date indicated on the label does not necessarily mean that the product cannot continue to be used. However, in this case, in order to ensure product quality, it is necessary to re-examine the relevant properties of the product.

　　packaging

　　-25kg iron can

　　-200kg iron drum

　　Additional information

　　FDA/BfR Information SILRES® MSE 100 does not meet the existing requirements for its application in food contact

　　Regulations on Exemption from Inspection of Organic Silicon Final Products.

　　For detailed information, please call us for consultation.

　　product data

　　General characteristic testing method numerical range

　　Clear appearance, low viscosity solution

　　Colorless

　　Dynamic viscosity DIN51562 20-35mm2/s

　　Density 1.14g/cm3 Flash point 56-65 ℃

　　The ignition point (liquid) of 220 ℃ is for reference only and should not be used as a preparation specification

AfterSalesService :

• MSE100 same silicone resin