Manufacturer Shandong offers prices for various types of insulated aluminum coils
Category:
metallurgy/Non ferrous metal alloys/Other non-ferrous metal alloys
Model:
Brand:
Guocheng
grade:
a series
material:
aluminum material
hardness:
two
purpose:
pipe insulation
main ingredients:
Aluminum composition
impurity content:
zero point zero zero two
granularity:
two
tensile strength:
one
elongation:
one
Specifications:
one
Place of Origin:
Shandong
manufacturer:
Shandong Guocheng Aluminum Industry Co., Ltd
Retail Price
11.60USD
重量
kg
- Product Description
-
grade a series
material aluminum material
hardness two
purpose pipe insulation
main ingredients Aluminum composition
impurity content zero point zero zero two
granularity two
tensile strength one
elongation one
Specifications one
Place of Origin Shandong
manufacturer Shandong Guocheng Aluminum Industry Co., Ltd
Description :
Manufacturer Shandong offers prices for various types of insulated aluminum coils
The company's main products include imported aluminum materials, produced aluminum materials, aluminum coils, insulation aluminum coils, orange peel aluminum coils, aluminum plates, aluminum rods, aluminum tubes, aluminum strips, and specifications.
The main products are aluminum alloy plates such as 1 series, 2 series, 3 series, 5 series, 6 series, and 7 series.
1. Aluminum coil processing technology
Silicon has a corrosive effect on hard alloys. It is recommended to use diamond cutting tools, but this is not the case as the increasing silicon content also increases the destructive power of the tools. Therefore, some manufacturers recommend using diamond cutting tools when the silicon content exceeds 8%.
Aluminum alloys with silicon content between 8% -12% are a transition zone, which can be used with both ordinary hard alloys and diamond cutting tools. However, when using hard alloys, tools that have undergone PVD (Physical Coating) method, do not contain aluminum elements, and have a smaller film thickness should be used. Due to the PVD method and small film thickness, it is possible for the cutting tool to maintain a sharp cutting edge (otherwise, sufficient passivation of the cutting edge is required to avoid abnormal growth of the film layer at the cutting edge, and cutting aluminum alloys will not be sharp enough), and the aluminum content in the film layer material may cause the blade film layer to have an affinity with the workpiece material, thereby damaging the bond between the film layer and the tool substrate.
Aluminum coil specification table:
Aluminum coil plate 0.1 thickness * 1000 width * C length Aluminum coil plate 0.2 thickness * 1000 width * C length Aluminum coil plate 0.3 thickness * 1000 width * C length Aluminum coil plate 0.4 thickness * 1000 width * C length Aluminum coil plate 0.5 thickness * 1000 width * C length Aluminum coil plate 0.6 thickness * 1000 width * C length Aluminum coil plate 0.2 thickness * 1000 width * C length Aluminum coil plate 0.8 thickness * 1000 width * C length material 1050.1060.3003.5052.6061 The above boards can all be cut to a fixed length Specification Table for Thermal Insulation Aluminum Coil:
Aluminum coil 0.3 thick x 1000 wide x 2000 long Aluminum coil 0.5 thick x1000 Aluminum coil 0.8 thick x 1000 wide x 2000 long Aluminum coil 0.8mm thick x 1200 Aluminum coil 1.0 thick x 1000 wide x 2000 long Aluminum coil 1.0 thick x 1000 Aluminum coil 1.0 thick x 1200 wide x 2400 long Aluminum coil 1.0 thick x 1500 Aluminum plate 1.2 thick x 1000 wide x 2000 long Aluminum coil 1.2mm x 1000 Aluminum plate 1.2 thick x 1000 wide x 4000 long Aluminum coil 1.2mm x 1200 Aluminum plate 1.2 thick x 1200 wide x 3000 long Aluminum coil 1.2mm x 1200 Aluminum plate 1.5 thick x 1000 wide x 2000 long Aluminum coil 1.5 thick x 1000 Aluminum plate 1.5 thick x 1000 wide x 3000 long Aluminum coil 1.5 thick x 1000 Aluminum plate 1.5 thick x 1000 wide x 4000 long Aluminum coil 1.5 thick x 1200 Aluminum plate 1.5 thick x 1200 wide x 3000 long Aluminum plate 1.5 thick x 1200 wide x 4000 long Aluminum plate 1.5 thick x 1300 wide x 3000 long Aluminum plate 1.5 thick x 1300 wide x 4000 long Aluminum plate 1.5 thick x 1500 wide x 3000 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1000 wide x 2000 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1000 wide x 2500 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1000 wide x 3000 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1000 wide x 3300 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1000 wide x 3500 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1000 wide x 3600 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1000 wide x 4000 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1000 wide x 4500 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1200 wide x 2400 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1200 wide x 2500 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1200 wide x 3000 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1200 wide x 3300 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1200 wide x 3500 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1200 wide x 3600 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1200 wide x 4000 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1200 wide x 4500 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1300 wide x 2500 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1300 wide x 3000 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1300 wide x 3300 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1300 wide x 3500 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1300 wide x 3600 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1300 wide x 4000 long Aluminum plate 2.0 thick/2.5 thick/3.0 thick x 1300 wide x 4500 long Aluminum plate 4 thick/5 thick/6 thick/7 thick/8 thick/9 thick/10 thick/all have the above specifications Pattern aluminum plate 1.5 thick x 1200 wide x 2400 long Pattern aluminum plate 2.0 thick x 1200 wide x 2400 long Pattern aluminum plate 2.5 thick x 1200 wide x 2400 long Pattern aluminum plate 3.0 thick x 1200 wide x 2400 long Pattern aluminum plate 4.0 thick x 1200 wide x 2400 long Pattern aluminum plate 5.0 thick x 1200 wide x 2400 long Pattern aluminum plate 6.0 thick x 1200 wide x 2400 long Pattern aluminum plate 7.0 thick x 1200 wide x 2400 long 
Summary of Quality Inspection of Thermal Insulation Aluminum Coil
The quality control of raw materials is related to the life of products. We strictly control the entrance and quality of products from the source. For all purchased raw materials, we first implement an inspection system according to regulations. The inspector confirms the quality certification documents submitted by the supplier and conducts inspections from aspects such as appearance and size. If necessary, we also conduct mechanical performance tests. Improve inspection transparency, conduct product inspections as soon as possible based on the size of the inspection quantity, and issue inspection reports in a timely manner.
AfterSalesService :
Key words:- aluminum coil
More Products
