Coated aluminum coil Shaoyang

Description :

　　Avoid the cold shrinkage of aluminum veneer during extreme heat and cold. Expansion joints allow skilled construction workers to apply glue and minimize the gap as much as possible during installation. The glue nozzle should be cut into a duckbill shape, evenly and at a controlled speed until the glue is full without hollowing or soil accumulation. Then, the joints should be wiped off with textured paper without leaving any traces. Pay attention to the maintenance after gluing. Before the glue hardens, do not get dust or scratch the aluminum veneer. After the installation of the curtain wall aluminum veneer is completed, the protective tape and film on the surface of the aluminum veneer should be peeled off layer by layer from top to bottom, and the surface of the aluminum veneer should be cleaned with clean water to ensure that there are no stains. Simultaneously dismantle the frame layer by layer, and pay attention to protecting the aluminum veneer during dismantling. Do not touch, scrape, or scratch the surface of the aluminum veneer when spraying.

　　Our company's main aluminum products are recommended to you in detail:

　　1、 Aluminum plate: thickness 0.3mm -180mm, width 900mm -2000mm

　　2、 Aluminum coil: thickness 0.10mm -12mm, width 150mm -2000mm

　　3、 Pattern aluminum plate: five willow leaf shaped, pointer shaped or customized thickness 1.2mm -8.0mm

　　4、 Rod: Squeezing round rod f (r, h112) Status: Diameter from φ 5mm to φ 180mm Quenching Status: Diameter from φ 5mm to φ 150mm (t4, t5, t6) 2 Squeezing square and hexagonal rod f Status: Tangential diameter from 5mm to 150mm Quenching Status: Tangential diameter from 5mm to 150mm

　　3 Squeezing rectangular rod (flat rod) width: 5mm~150mm thickness: 3mm~150mm

　　5、 Pipe materials: 1060, 2a12, 3a21, 5a02, 6061, 6063, 3003, 5052, 7075, 2011, 2024, 1050, 6068 Extruded seamless round pipes (aluminum flat pipes, aluminum square pipes, aluminum alloy square pipes, elliptical pipes, harmonica pipes) Outer diameter range: φ 20mm~φ 300mm Wall thickness range: 3mm~40mm

　　2. The outer diameter range of the drawn tube is from 4mm to 28mm

　　1. Aluminum plate, aluminum strip, aluminum foil (thickness 0.05-200mm, width 9-2100mm, length can be cut according to user requirements)

　　(1) Anti corrosion and insulation board

　　(2) Pattern aluminum plate (large five bar type, small five bar type, pointer type, orange peel pattern, diamond type and customized)

　　(3) Corrugated aluminum plate (pressed)

　　(4) Decorative curtain wall panels, color coated aluminum panels (color, panel reinforcement processing)

　　(5) Ultra wide, ultra hard alloy aluminum plate, mold plate, label, electrical plate

　　(6) Electrolytic expansion of aluminum soft strips, aluminum welding plates, and aluminum cover panels

　　(7) Cable foil, air conditioning foil, and aluminum strip foil for other purposes

　　2. Aluminum fittings (aluminum elbows, aluminum tees, aluminum tees, aluminum reducers, aluminum flanges, aluminum flanges, aluminum welding rings, and non-standard fittings)

　　3. Aluminum tube (outer diameter ranging from 4mm to 400mm, wall thickness ranging from 0.25mm to 40mm)

　　mm., Delivery length can be customized according to user requirements

　　(1) Seamless aluminum tube (extruded, drawn aluminum tube)

　　(2) Aluminum flat tube, aluminum square tube, aluminum alloy square tube, aluminum alloy rectangular tube, elliptical tube, harmonica tube (3) aluminum coil tube

　　4. Aluminum rod (diameter 5- diameter 400mm)

　　5. Aluminum profiles (industrial profiles, civil profiles, building profiles)

　　6. Conductive aluminum busbars, aluminum bars, aluminum wires, aluminum rods, aluminum stranded wires, aluminum particles and ingots, cast rolled plates, aluminum alloy ingots, aluminum cast bars

　　6、 The main products of the enterprise include: aluminum sheet, strip, and coil with a thickness of 0.012-500mm and a width of 10-2100mm (sheet length: 700-6500mm, can be customized according to requirements); 0.015-0.145 * 1300mm air conditioning foil; 0.15-0.2 * 500mm cable foil; 0.02-0.05mm packaging foil. Main materials that can be produced: 1100, 1145, 1050, 1060, 1070, 1200, 3003, 3A21, 3004, 3005, 3105, 5052, 5005, 5A06, 5083, 5754, 5A02, 5182, 6063, 6061, 8011, etc. Product status: F、H112、H12、H14、H18、H20、H22、H24、H26、H32、H16、H34、T6、T4、O。 Mold alloy aluminum plate, ultra wide/ultra thick alloy aluminum plate, tensile alloy aluminum plate, peritoneal alloy aluminum plate, electrical radiator alloy aluminum plate, thick alloy aluminum plate 2A12 T4/LY12. Aluminum ceiling, curtain wall alloy aluminum plate, anti rust alloy aluminum coil, spray coating (fluorocarbon, polyester)/aluminum oxide coil, anti rust alloy aluminum coil, sign aluminum plate, decorative pattern aluminum plate: three bar, five bar anti slip aluminum plate, compass pattern aluminum plate, orange peel, water ripple, gemstone flower embossed decorative aluminum plate, color coated pattern aluminum plate, batch numbers: 1060, 3003, 5052, etc., thickness 0.2-6.0mm, width 800-1700mm, length not limited series products. Color coated production line can provide polyester color coated, fluorocarbon color coated, and color printed aluminum coils, decorative aluminum plates, patterned aluminum plates, and fluorocarbon sprayed curtain wall aluminum plates. Thermal insulation and rust prevention aluminum sheet, profiled aluminum plate, corrugated aluminum plate, V-125 aluminum tile, corrugated water corrugated aluminum plate, etc. for power plant chemical plants. Can meet different user needs, with commonly used specifications available; Special sizes can be customized and processed according to customer requirements. 5052/6061.6063.7075 cutting sales, free cutting

　　Our company mainly engages in deep processing of aluminum materials, including coils, insulation aluminum coils, aluminum sheets, insulation aluminum sheets, color coated aluminum coils, patterned aluminum coils, aluminum plates, aluminum tiles, embossed aluminum plates, mirror aluminum plates, aluminum corrugated plates and aluminum alloy plates, coils, pipes, rods, wires, rows, strips, foils, etc. Aluminum specifications, dimensions, and performance can be customized according to the actual needs of users. Aluminum products are widely used in industries such as aerospace, instrumentation, chemical, construction, packaging, air conditioning, solar energy, refrigerators, washing machines, anti-corrosion and insulation, and automobile manufacturing. There are more than 10 varieties and over 1000 specifications of products produced according to national standards. Our clients cover 24 provinces, cities, and autonomous regions in China; And exported to more than 20 countries and regions. With excellent products and services, we have gained the trust and praise of customers both domestically and internationally.

AfterSalesService :

• aluminum coil