Shandong 400g PE composite geotextile with two fabrics and one membrane impermeable geotextile
Shandong 400g PE composite geotextile with two fabrics and one membrane impermeable geotextile

Shandong 400g PE composite geotextile with two fabrics and one membrane impermeable geotextile

Category:

building materials/Geosynthetic materials/Composite geotechnical materials

Model:

400g

Brand:

Shandong Dexuda

model:

400g

purpose:

Waterproof, anti-seepage, anti-corrosion, moisture-proof, and isolation

shape:

coil

manufacturer:

Shandong Dexuda Geotechnical Materials Co., Ltd

Retail Price

3.61USD


重量

kg

  • Product Description
  • model

    400g

    purpose

    Waterproof, anti-seepage, anti-corrosion, moisture-proof, and isolation

    shape

    coil

    manufacturer

    Shandong Dexuda Geotechnical Materials Co., Ltd

    Description :

    山东400gPE复合土工膜

      Shandong 400g PE composite geotextile with two fabrics and one membrane impermeable geotextile.

      Hebei 400g PE composite geotextile with two fabrics and one membrane geotextile.

    山东400gPE复合土工膜

      Shandong 400g PE composite geotextile with two fabrics and one membrane impermeable geotextile.

    山东400gPE复合土工膜

      PE composite geomembrane, also known as PE composite geomembrane (one fabric, one film, two fabrics, one film), is widely used in channel anti-seepage engineering. The extensive application and effectiveness of geosynthetic materials in civil engineering, especially in flood control and emergency engineering, have attracted high attention from engineering and technical personnel. For the application technology of geosynthetics, the country has put forward standardized technical requirements from aspects such as anti-seepage, filtration, drainage, reinforcement, and protection, greatly accelerating the promotion and application of new materials. This material has been widely used in the anti-seepage engineering of irrigation channels. Based on construction practice, this article briefly discusses the application technology of composite geomembranes. Shandong 400g PE composite geotextile with two fabrics and one membrane impermeable geotextile.

      PE composite geomembrane is an impermeable material composed of geotextile and geomembrane. It is mainly used for anti-seepage. Two fabrics and one membrane. The impermeable geotextile is divided into one fabric and one membrane and two fabrics and one membrane, with a width of 4-6m and a weight of 200-1500g/m2. It has high physical and mechanical performance indicators such as tensile strength, tear resistance, and bursting resistance, and can meet the needs of civil engineering such as water conservancy, municipal engineering, construction, transportation, subway, tunnel, etc. Due to the use of polymer materials and the addition of anti-aging agents in the production process, it can be used in unconventional temperature environments. Ningxia 400g PE composite geotextile with two fabrics and one membrane waterproof geotextile.

      Precautions for the construction of PE composite geomembrane:

      1. Two fabrics and one membrane impermeable geotextile is formed by heating one or both sides of a thin film in a far-infrared oven, and pressing the geotextile and geotextile together through a guide roller to form a composite geotextile. With the improvement of production technology, there is also a casting method for making composite geomembranes. Its forms include one cloth and one film, two cloths and one film, two films and one cloth, etc. Yunnan 400g geotextile with two fabrics and one membrane, two fabrics and one membrane.

      2. A protective layer of impermeable geotextile with two fabrics and one membrane to prevent damage to the protective anti-seepage layer. In order to reduce the ultraviolet radiation and increase the anti-aging performance, the embedding method is adopted. Jilin 400g PE composite geotextile with two fabrics and one film impermeable geotextile.

      In the construction of PE composite geomembrane, the first step is to use smaller diameter sand or clay to level the base surface, and then lay the PE composite geomembrane. Two fabrics and one membrane impermeable geotextile should not be tightly stretched. The two ends should be buried in the soil in a corrugated shape, and then a transition layer of about 10cm should be laid on the PE composite geotextile membrane with fine sand or clay. Build 20-30cm stone blocks (or precast concrete blocks) as a protective layer against erosion. During construction, efforts should be made to avoid stones directly hitting the two cloth and one membrane impermeable geotextile, and protective layer construction should be carried out while laying the membrane. The connection between PE composite geomembrane and surrounding structures should be anchored with expansion bolts and steel plate pressure strips. The connection part should be coated with emulsified asphalt (2mm thick) for bonding to prevent leakage at that location. Shandong 400g PE composite geotextile with two fabrics and one membrane impermeable geotextile.

      Jiangxi 400g PE composite geotextile with two fabrics and one membrane geotextile.

    山东400gPE复合土工膜

      Shandong 400g PE composite geotextile with two fabrics and one membrane impermeable geotextile.

    山东400gPE复合土工膜

      Shanghai 400g two cloth, one film, two cloth, one film impermeable geotextile.

    山东400gPE复合土工膜

      Shaanxi 400g waterproof geotextile with two fabrics and one membrane waterproof geotextile.

    AfterSalesService :

    Key words:
    • PE composite geomembrane