Production of 304 stainless steel composite pipe guardrail Shengxing 201 stainless steel composite pipe guardrail accepts customization

Description :

　　Production of 304 stainless steel composite pipe guardrail Shengxing 201 stainless steel composite pipe guardrail accepts customization

　　Quality control: Before each installation of the template, it should be cleaned and coated with release agent, which should be evenly applied. 2. The welding and binding of guardrail steel bars should comply with the design and specification requirements, especially the position of the steel bars measured internally. 3. After installing the template, check the side and top surfaces of the template, which should be straight. 4. The honeycomb surface area of the guardrail concrete shall not exceed 0.5% of the surface area, and the depth shall not exceed 10mm. 5. Single side guardrails within the same span shall be poured at once, and steel formwork shall be used for the end formwork to ensure that the end appearance is flat. 6. There shall be no cracking on the guardrail surface and joints. Errors, flatness, and appearance quality issues should be promptly addressed, and color consistency should be ensured. The top surface is smooth and beautiful, with consistent height. 7. The guardrail of the entire bridge has straight linear sections, smooth curved sections with rounded curves, and no broken lines or dead corners

　　Shandong Tai'an Zinc Steel Guardrail Pipe Manufacturer Composite Pipe Landscape Guardrail Hot dip Galvanized Steel Pipe Guardrail Price

AfterSalesService :

• Stainless steel composite pipe guardrail