Galvanized sign poles for Tongren municipal planning, scenic area road traffic signs, and sign poles for processing national urban traffic

Description :

　　Function of Traffic Sign Pole:

　　1. Road traffic sign posts are generally located on the right side of the road, in a position that is easy for drivers to see. When setting up road traffic signs on lanes such as overtaking lanes, lanes, and emergency parking belts, it is difficult to do so on the roadside. It is usually set up above the road through a gantry to facilitate driver observation and solve the problem of cantilevered traffic sign poles obstructing each other. Near the end of the highway, some prohibition or warning signs will also be placed within the median strip.

　　2. When setting the position of traffic sign posts, it is important to consider that the signs do not obstruct or affect each other, and that they are not obstructed by other buildings that obstruct the view of drivers and passengers.

　　3. The setting of road traffic signs such as interchanges and service areas should be based on the principle that vehicles approaching intersections or diverging or merging points will not affect the driver's line of sight.

　　4. The installation of road traffic sign posts requires drivers to have sufficient reaction time to make necessary judgments for operation. Therefore, in order for the content of the logo to play such a role, there should be a certain amount of advance in the setting of the logo. In general, the larger the board size and simpler the content of road traffic signs, the smaller the advance distance of the sign can be.

　　5. The roadside traffic sign post must have a clear distance of 25cm from the outer edge of the shoulder, and there should be a clearance of 2m between the lower edge of the sign board and the outside road surface of the emergency stop zone. When setting up signs above highways, the clear distance between the lower edge of the sign board and the road surface should be greater than 5m.

　　6. The road traffic sign board is arranged at a right angle to the highway and can be slightly tilted inward. The front of the board faces the direction of traffic, making it easy for drivers to observe. There is no unified opinion on the issue of leaning roadside signs in road traffic signs. Some places believe that the signboard should only tilt inward when it is more than 9m away from the edge of the shoulder. When the signboard is less than 9m away from the edge of the shoulder, to prevent glare caused by reflection, it is tilted outward by about 30 degrees.

　　Classification of sign posts:

　　1、 A single column traffic sign pole is a sign board installed on a single column, suitable for warning, prohibition, indication signs and small directional signs of medium and small sizes.

　　2、 Multi column traffic sign pole is a sign board installed on two or more columns, which is suitable for rectangular directional signs.

　　3、 Cantilever traffic sign poles include F-type traffic sign poles and T-shaped traffic sign poles. A cantilevered traffic sign pole is a sign board installed on a cantilever, and the height of the lower edge of the sign above the ground should be greater than the clearance height specified for the road.

　　4、 Portal type traffic sign pole - traffic gantry. The sign is installed on the gantry, and the height of the lower edge of the sign from the ground should be greater than the clearance height specified for the road.

　　5、 Attached traffic sign post: The sign is attached and installed on the overpass and nearby structures, and is divided into two types: attached on the roadway and attached on the road according to the position of the attached layout.

　　Traffic sign poles are divided into single column sign poles, double column sign poles, single hanging sign poles, and double hanging sign poles

　　Single hanging sign poles are divided into: single hanging L-shaped sign pole, single hanging F-sign pole, single hanging three arm sign pole

　　Double hanging sign poles are divided into: double hanging T-shaped sign poles, double hanging dry sign poles, double hanging three arm sign poles

　　The main raw materials are steel pipes and steel plates, with materials of Q235 and Q345 and specifications of 76mm-351mm diameter

　　Our company's various traffic sign poles, monitoring poles, and street lamp poles are all made of steel with advanced technology. The main pole material is made of seamless steel pipes or Q235 or Q345 steel plates. Strong wind resistance, high strength, and large load-bearing capacity. The entire pole adopts a one-time bending process or flange splicing process, making installation more convenient and flexible. The surface of the rod is treated with degreasing, phosphating, and hot-dip galvanizing processes, with a service life of over 20 years. The appearance of the pole adopts outdoor electrostatic spraying technology, and the color is coordinated with the surrounding environment. Multiple styles can be adopted according to the requirements of customers and the surrounding environment, with flexibility and versatility. The pole body is formed by large-scale mechanical bending in one go, and its appearance includes circular, hexagonal, octagonal, etc. Both the inside and outside of the pole body are treated with hot-dip galvanizing for corrosion prevention. If necessary, it can also be used according to the actual usage environment. The service life can reach more than 20 years. The spray painted sign pole has a beautiful appearance and multiple colors to choose from.

　　Types of steel pipes for traffic sign posts: Generally, straight seam welded pipes or heat expanded seamless steel pipes are used. The function of road signs: There are many pillars on rural or mountainous roads, which serve to inform and prompt. Types of reflective film: Class I, Class II, Class III, Class IV, Class V. Origin of reflective film: 3M, domestic and other brands in the United States. Traffic sign poles, road signs, and highway signage are priced and customized according to the drawings provided by Hebei manufacturers. Single column sign size unit (mm): Rural roads and national highways: △ 700, △ 900, φ 600, φ 800 Provincial roads and highways: △ 900, △ 1100, △ 1300, φ 800, φ 1000, φ 1200, φ 1400 Sign board thickness: 1.5mm, 2.0mm, 2.5mm, 3.0mm Material properties: should comply with the relevant requirements of GB5768, GB/T6892, and JT/T279 Material of aluminum plate for traffic signs: 1060, 1085, 3004, 5052, 5083, 6061, 6063. Chemical composition: aluminum Al, silicon Si, copper Cu, magnesium Mg, zinc Zn, manganese Mn, chromium Cr, iron Fe. Reflective film category: Class I (engineering grade), Class II (super engineering grade), Class III (high-strength grade), Class IV (super strong grade), Class V (diamond grade). Origin and quality of traffic road signs: Hebei Guocheng Transportation Facilities Co., Ltd. All reflective films for traffic road signs are domestically produced or imported, with a wide variety of types. Among them, the imported 3M traffic sign special reflective film has good quality assurance, with good reflective strength, stable performance, and resistance. High UV coefficient, most commonly seen in the traffic sign industry, with excellent brightness. The quality of other membranes is relatively poor.

AfterSalesService :

• Galvanized Sign Pole for Tongren Municipal Planning