Customized single column traffic sign post for high-speed traffic sign post selection of national city transportation facilities

Description :

　　Transportation facilities - Highway signs - Traffic signs - Traffic sign manufacturers - Road sign pole production base - Cantilever L-shaped sign pole manufacturers. T-shaped cantilever traffic sign poles are suitable for the following situations:; 1. Difficulty in column installation; 2. The road is wide and the traffic volume is high. Large vehicles on the outer lane should respect the line of sight of small vehicles on the inner lane; 3. Limited visibility or line of sight; 4. There are requirements for the landscape. Portal type traffic sign pole - The portal type traffic sign pole is a sign installed on the portal, and the height of the lower edge of the sign above the ground should be greater than the clearance height specified for the road. Portal style traffic sign posts are suitable for the following situations: 1. Multi lane roads (leading to three or more lanes) require separate indication of each lane. 2. Large vehicles in the outer lane obstruct the view of small vehicles in the inner lane due to high traffic volume; 3. Traffic remains in sections where interweaving, diversion, and rivers occur at higher operating speeds, such as: building a close distance sign at an interchange, setting up dense signs at the interchange main line area where the highway intersects with the highway, etc; 4. Due to space limitations, it is difficult to install column and cantilever structures; 5. The exit ramp is on the left side of the traffic response; 6. There are requirements for the landscape. Attached traffic sign post: The sign is attached and installed on the overpass and nearby structures, and is divided into two types: attached on the roadway and attached on the road according to the position of the attached layout.

　　Cantilever traffic sign pole - F-type traffic sign pole, T-shaped traffic sign pole. Cantilever traffic sign pole is a sign board installed on the cantilever, and the height of the lower edge of the sign from the ground should be greater than the clearance height specified for the road. The gantry traffic sign pole is installed on the gantry, and the height of the lower edge of the sign above the ground should be greater than the clearance height specified for the road. Attached traffic sign post: The sign is attached and installed on the overpass and nearby structures, and is divided into two types: attached on the roadway and attached on the road according to the position of the attached layout.

　　Maintenance of road traffic sign posts.

　　1. The setting (adjustment) of road traffic signs should be completed before the completion and opening of new (renovated, expanded) roads, and the signs related to these new (renovated, expanded) roads in the road network should also be adjusted synchronously to improve their settings. When road traffic conditions change, the setting of relevant signs should be adjusted in a timely manner. Highway number and city road name signs should be used as much as possible to enable road users to understand their route and location. 3. The logo should be regularly cleaned and maintained to maintain sufficient reflectivity and ensure visual recognition. During the use of the logo, it should also be avoided from being obscured by numbers or being affected by street lighting that affects visual recognition. The shape and color of the logo should comply with the provisions of this section during its service life.

AfterSalesService :

• Customized single column traffic sign post