Z5 type welded high-efficiency vermiculite insulation sliding pipe, Tuoxingsong pipeline, welcome to purchase

Description :

　　If polyurethane cold insulation pipe supports are used for transporting low-temperature media, if special materials are not used for external protection, it will result in loss of cooling capacity during transportation. Therefore, special materials should be used for cold insulation during low-temperature transportation. Introduction to Sliding Pipe Support, Fixed Pipe Support, and Guided Pipe Support: There are several types of T-shaped pipe supports: J1T pipe support (welded type), J2T pipe support (clamp type), J3T pipe support (reinforced welded type), and J4T pipe support (reinforced clamp type). J1 and J2 types are suitable for pipelines with DN ≤ 150mm, while J3 and J4 are suitable for pipelines with DN 200-DN600. If the position of the pipe support is on the beam and there are no special instructions, place the pipe support L/2 in the middle of the beam. When the length of the pipe support is L=300, it is suitable for a pipeline axial elongation of 50, and when L=450, it is suitable for a pipeline axial elongation of 125. If the axial elongation of the pipeline is greater than 125 millimeters, the elongation amount needs to be indicated. J2-1aT shaped pipe support wholesale pipe support bolts, nuts, washers, pin seat bolts, screws, and bolts should be made of steel with chemical composition and mechanical properties that meet the requirements of GB/T3098.1 and undergo heat treatment according to the required performance level. Nuts should be selected according to the performance level, diameter, and nut height of the matching bolts, screws, and studs in accordance with the provisions of GB/T 3098.2.

AfterSalesService :

• sliding pipe support