TW-GHP-9080D microcomputer controlled waterproof constant temperature box, water jacket laboratory biological incubator

Description :

　　TW-GHP-9080DProduct Introduction of Diaphragm Incubator:

　　Equipment for storage of bacterial strains, biological cultivation, and scientific research in colleges and universities, biology, agriculture, and scientific research departments.

　　TW-GHP-9080DFeatures of the waterproof incubator product:

　　1. A digital microcomputer controller with timing function will automatically sound and light an alarm when the temperature inside the box exceeds the set value or the water level of the water jacket is too high or too low, and stop heating at the same time when the water level is low.

　　2. The water jacket heating method uses magnetic door seals and insulation materials. Double door structure, the inner door is a glass door for easy observation, and the internal shelf can be adjusted freely.

　　3. Su304 Stainless Steel Studio. Good temperature uniformity and can maintain a constant temperature for a long time even after power failure.

　　4. Equipped with an independent temperature limit alarm system, it automatically interrupts when the temperature limit is exceeded, ensuring the safe operation of the experiment without any accidents. (Optional)

　　5. Can be equipped with a printer or 485 interface, used to connect to a printer or computer for real-time recording of temperature parameter changes. (Optional)

　　6. Equipped with a "D" series LCD temperature controller.

　　TW-GHP-9080DTechnical parameters of waterproof incubator:

　　Model: TW-GHP-9080D

　　Heating method: water jacket type

　　Temperature control range: RT+5 ℃~65 ℃

　　Temperature resolution: 0.1 ℃

　　Constant temperature fluctuation: ± 0.5 ℃

　　Temperature uniformity: ± 1 ℃

　　Power supply voltage: 220V/50Hz

　　Input power: 660W

　　Working environment temperature: 5 ℃~35 ℃

　　Inner container size (mm): 400 × 400 × 500

　　Dimensions (mm): 550 × 550 × 790

　　Load carrier (standard): 2 pieces

　　Timing range: 1 to 9999 minutes

　　The performance parameter test under no-load conditions is: ambient temperature of 20 ℃, ambient humidity of 50% RH

　　Equipment usage conditions: ambient temperature of 5-30 ℃.

　　TW-GHP-9080DOptional parts for waterproof incubator:

　　1. Intelligent Program LCD Temperature Controller

　　2. Intelligent Program Temperature Controller

　　3. Temperature limiting controller

　　4. RS485 interface and communication software

　　5. Printer

AfterSalesService :

• incubator