DSM Dingxiu Tu-02 epoxy resin anti-corrosion primer
Category:
building materials/Corrosion resistant and radiation resistant materials/Building anti-corrosion coating
Model:
a bucket
Brand:
DSM Dingxiu Tu
Retail Price
10,000,000.00USD
重量
kg
- Product Description
-
Description :
DSM Dingxiu Tu-02 epoxy resin anti-corrosion primer is an epoxy anti-corrosion primer prepared by adding a certain amount of iron oxide red, fillers, additives, active solvents, etc., with epoxy resin as the film-forming substance. Due to the high polarity of hydroxyl and ether bonds in the molecular structure of epoxy resin, the coating has good chemical and alkali resistance, better resistance to heat and alkaline media, excellent water resistance, and DSM Dingxiu Tu-02 can fully infiltrate the base surface, with strong adhesion to various base materials. Due to the presence of polar groups, the coating will have a certain degree of hydrophilicity. If the formula is selected properly, a coating with good water resistance can also be obtained. Therefore, red anti-corrosion paint can be applied on damp substrates.
Main performance:
1. No solvent evaporation, no harm to construction personnel and the environment;
2. Long term heat resistance up to 400C;
3. The paint film has long-term weather resistance, water resistance, salt water resistance, resistance to various oil immersion, and strong resistance to various strong solvents;
4. Excellent welding performance and anti-static properties;
Scope of application:
This product is suitable for environments with high requirements for rust removal and anti-corrosion, such as petrochemicals, shipbuilding, containers, ports, bridge towers, outdoor steel structures, outdoor tanks, building steel, color steel, and galvanized metal sheet surfaces;
Construction method:
1. The mixing ratio is component A; Component B=5:1 (weight ratio).
2. After opening the packaging of component A, mix thoroughly and pour component B (curing agent) into component A according to weight ratio. Stir thoroughly and let it stand for 30 seconds before adding an appropriate amount of diluent to adjust the construction viscosity.
3. Brushing, air spraying, airless spraying, roller brushing. The applicable period is 4 hours (25 ° C).
AfterSalesService :
Key words:
