Three cloth four oil anti-corrosion steel pipe manufacturer

Description :

　　Epoxy anti-corrosion coating is made by mixing epoxy resin, pigments, bulk pigments, drying agents, additives, organic solvents, etc. It has excellent anti-corrosion performance and is widely used in many fields, suitable for coating metal surfaces, electrical appliances, instruments and other casings. So some consumer friends are interested in epoxy anti-corrosion paint coatings. Below is a brief introduction for you. Nowadays, epoxy coating anti-corrosion is a very common anti-corrosion method, and many epoxy anti-corrosion coating manufacturers produce products with guaranteed quality. We have many choices, and epoxy anti-corrosion paint coatings also have great development potential. The market demand is relatively large. When we apply anti-corrosion coatings, we need to choose epoxy anti-corrosion coatings to ensure better construction results and greater reliability.

　　The application of epoxy coal tar pitch is very extensive, and its performance after drying is also very good. However, during storage and use, it is easy to deteriorate due to high temperature or humidity. Therefore, it should be kept away from heat sources or open flames before drying and forming, and should not be exposed in a humid environment. Its application is very common in underground pipelines, such as epoxy coal tar anti-corrosion steel pipes, which are pipeline facilities mainly composed of steel pipes and epoxy coal tar coatings. The performance is quite good, and it can effectively transport relevant media in underground environments with high efficiency and good resistance to various corrosion. It is a commonly used underground pipeline. The quality of epoxy coal tar anti-corrosion steel pipes is a concern for various buyers, and due to the wide range of manufacturers, it is important to distinguish between good and bad products. So 8710 anti-corrosion coating is generally applied to the inner layer of water supply pipelines, which is the primer The 8710 anti-corrosion coating has the characteristics of being non-toxic and resistant to microbial contamination, so it is often used as a topcoat for water supply pipelines. The 8710 non-toxic drinking water anti-corrosion coating is a non-toxic drinking water coating with good anti-corrosion performance. Rust proof, odorless, non-toxic after curing. The coating structure is dense, with good waterproof permeability, strong adhesion, and a tough and full coating.

　　The characteristics and deep processing utilization of epoxy coal tar anti-corrosion paint (steel pipe), the components and functions in the formula of epoxy coal tar anti-corrosion paint: When the goal of epoxy coal tar coating is to prevent cracking of asphalt paint, enhance toughness and adhesion, it is necessary to heat and boil to remove moisture and impurities, and the heating temperature. Epoxy resin: It is an important film-forming substance of epoxy coal tar pitch, with advantages such as strong adhesion, low shrinkage rate, good stability, high strength, good toughness, and good chemical stability. Coal tar pitch: resistant to water, moisture, mold, nitrogen oxides, carbon dioxide, and other dilute acids and alkalis, and has a certain resistance effect. The more aromatic compounds in asphalt, the better its wet solubility with epoxy resin. Spiral steel pipes feed the strip steel into the welded pipe unit, where it is rolled by multiple rollers and gradually rolled up to form a circular billet with open gaps. The pressing amount of the extrusion roller is adjusted to control the weld seam gap between 1-3mm and ensure that both ends of the weld are level. The compressive strength of the composite steel pipe coated with plastic inside and outside the spiral plate heat exchanger is outstanding, and its ultra-high strength can withstand great pressure. The inner and outer plastic coated composite steel pipes have the characteristics of flat lubrication, both on the outer surface and inner wall of the pipe, which facilitates the threading work of construction personnel in engineering construction.

　　The use of high value-added heavy-duty anti-corrosion coatings is still a beneficial way for the country and the people. Mix and mix the epoxy coal tar paint thoroughly, then cure it and use it up within 4 hours. The construction of anti-corrosion epoxy coal tar paint shall be carried out according to the on-site conditions, and the brushing method shall be accepted. The construction tools for painting operations should be clean, and appropriate penalties should be imposed for clearing and disposing of them after use. After passing the inspection of rust removal of steel, apply primer and topcoat. When painting, leave as much space as possible for the weld position of the steel device, with a reserved length of about, to avoid difficulty in cleaning the root during welding and affecting the welding quality. The enterprise standard for this product is Q/DH02-2009 "Liquid Epoxy Anti corrosion Coating", and its technical indicators are equivalent to the Chinese petroleum and natural gas industry standards SY/T0447-96 "Technical Standard for Epoxy Coal Tar Asphalt Anti corrosion Coating of Buried Steel Pipelines" and SY/T0457-2000 "Technical Standard for Internal Anti corrosion Coating of Liquid Epoxy Coating for Steel Pipelines". It also meets the requirements of the American Water Plant Association standard "Internal and External Anti corrosion Coating of Liquid Epoxy Coating for Steel Water Pipelines".

　　The implementation of anti-corrosion engineering for epoxy coal tar pipelines must meet the following conditions: *, complete design and other technical documents, construction drawings must be reviewed, secondly, technical disclosure of construction plans must be completed, and safety technical education and necessary technical training must be conducted. Thirdly, all equipment, pipe fittings, and accessories must have factory certificates of conformity or corresponding handover certificates. Fourthly, materials, machinery, construction facilities, and sites must be complete. Fifth, there must be reliable protective facilities that are safe and reliable. Construction water, electricity, and gas must be able to meet continuous construction needs. Sixth, during the implementation of the anti-corrosion project for epoxy coal tar pipelines, intermediate inspections must be carried out. After the completion of the anti-corrosion project, acceptance should be carried out immediately. Seventh, in order to ensure the safety or convenience of the anti-corrosion project for epoxy coal tar pipelines, access holes must be set for non removable closed equipment. The size and number of manholes should be based on the equipment volume, and the number of manholes should not be less than 2. Eighth, in the implementation of epoxy coal tar pipeline anti-corrosion engineering, there are corresponding requirements for steel equipment, such as pipes, fittings, and steel surfaces, which must not have scars, pores, overlapping skin, or severe corrosion spots.

　　In order to save steel, reinforced concrete pipes were promoted and used in the 1950s. They can withstand high working pressure, are corrosion-resistant, inexpensive, and durable, without reducing the water carrying capacity of the pipes. However, they are heavy, hard and brittle in texture, afraid of collision, and prone to leakage at the interface. The requirement for a flat and solid bottom of the pipe trench is high, and the lack of accessories increases the difficulty of maintenance in the future. The current usage is gradually decreasing; Plastic pipes have good anti-corrosion and seismic resistance, certain elasticity in tensile and bending resistance, smooth surface, good hydraulic conditions, stronger frost resistance than metal pipes, and are lightweight Due to the insufficient pressure bearing capacity of the pipes, their brittleness and susceptibility to aging, as well as their high cost, they are only used for indoor pipelines Oxygen coal tar coatings are divided into two types based on their functional applications: epoxy coal tar primer and epoxy coal tar topcoat. Our company's epoxy coal tar primer is a solvent based product; Epoxy coal tar surface paint is a series of products, divided into solvent-free type (gh201) and thick slurry type (gh202) according to solid content. It is also divided into temperature resistant type (used within 150 ℃, adding w) and standard type (used within 100 ℃) according to the heat resistance temperature of the coating during use, for users to choose according to the actual requirements of anti-corrosion engineering.

AfterSalesService :

• Three cloth four oil anti-corrosion steel pipe