8710 anti-corrosion spiral welded pipe manufacturer

Description :

　　IPN8710 non-toxic drinking water anti-corrosion coating is a non-toxic drinking water coating with good anti-corrosion performance. Rust proof, non irritating, non-toxic after curing. The coating structure is dense, with good waterproof permeability, strong adhesion, and a tough and full coating. IPN8710 Primer: Composed of polyurethane polyethylene, modified epoxy resin, non-toxic anti rust pigments and fillers, additives, etc., it solidifies at room temperature to form an interpenetrating network. The coating structure is dense, resistant to acid, alkali, and salt, with excellent anti rust performance and strong adhesion. IPN8710 topcoat: composed of epoxy, rubber resin modification, non-toxic anti rust pigments and fillers, additives, etc. Excellent chemical resistance, non-toxic, and resistant to microbial erosion. Coating method: Brush coating or high-pressure airless spraying Application: IPN8710 primer is used for anti-corrosion primer coating on the inner wall of drinking water pipelines; IPN8710 topcoat is used for anti-corrosion topcoat coating on the inner wall of water supply pipelines. Scope of use: Used for anti-corrosion of drinking water tanks, inner walls of water pipelines, oil pipelines, gas pipelines, sewage pipelines, etc.

　　Since the production of IPN8710 interpenetrating network coating in China in 1987, different resins and pigments have been used for technological improvement to resist different corrosive media. Special coatings have been developed for water pipeline anti-corrosion coating, chemical atmospheric anti-corrosion coating, gas cabinet, pipe anti-corrosion coating, oil storage tank, oil pipeline anti-corrosion coating, etc. The comprehensive performance of this series of coatings is as follows: 1. Simple surface treatment; 2. Excellent anti-corrosion performance; 3. The performance price ratio is reasonable.

　　This product belongs to the category of "chemical reactive" coatings and is packaged in two components. Component A consists of resin and initiator, while component B consists of active monomer and catalyst. So before use, the two components must be weighed and proportioned according to the specified important ratios, mixed and stirred evenly, and cured for 30 minutes according to the specified time before application. The cured coating should be used up within 6-8 hours to avoid waste of bonding. The ratio is as follows:?? Primer, component A: component B=1 barrel: 1 barrel. Please strictly follow the required ratio (or construct according to the ratio informed by the manufacturer at that time) for IPN8710 drinking water anti-corrosion steel pipe topcoat, with component A: component B=1 barrel: 1 barrel. Please strictly follow the required ratio (or construct according to the ratio informed by the manufacturer at that time) after applying one coat of paint, wait for more than 24 hours before applying the second coat of paint. After use, the packaging lid of the paint must be tightly sealed to prevent it from deteriorating due to moisture, alcohol, and water. The paint film can only be put into use after being applied at room temperature and dried at room temperature for 7-10 days.

AfterSalesService :

• 8710 anti-corrosion spiral welded pipe