Pipeline anti-corrosion three oil two cloth manufacturer

Description :

　　Three oil and two cloth anti-corrosion construction technology for drainage pipelines;

　　1. Corrosion prevention mechanism with rust: When the two monomers of IPN are mixed in proportion, a reaction occurs immediately. At the beginning, the viscosity of the mixture is very low, and its penetration rate is fast. It can directly penetrate to the surface of the steel and separate the rust body from the steel surface, then surround it. As the reaction time increases, the mixture gradually solidifies to form an IPN mesh film, which adheres to the surface of the steel and rejects the progress of rust.

　　2. The pre-treatment of anti-corrosion parts eliminates oil stains, dust, welding slag, oxide scale, and loose rust on the surface of anti-corrosion parts, keeping the surface of anti-corrosion parts dry and free of stains.

　　3. Preparation of paint preparation: The amount of paint should be estimated, mixed in proportion, thoroughly stirred, and used up within the specified time.

　　4. Spray anti-corrosion parts should not be sprayed less than three times.

　　According to the anti-corrosion level, there are three situations:

　　(1) Ordinary anti-corrosion construction: First apply two layers of primer (colorless), then brush two layers of topcoat.

　　(2) Strengthen anti-corrosion construction: First apply a layer of primer (colorless), then wrap a layer of degreased fiberglass cloth, and at the same time brush a layer of topcoat, * spray two layers of topcoat.

　　(3) Strengthen anti-corrosion construction: First apply a layer of primer (colorless), then wrap a layer of degreased glass fiber cloth and apply a layer of topcoat, then wrap a layer of degreased glass fiber cloth and apply a layer of topcoat, and spray three layers of topcoat. Mechanical spraying or manual painting can be used for the construction of various anti-corrosion levels mentioned above.

AfterSalesService :

• Pipeline anti-corrosion with three oils and two fabrics