Price for anti-corrosion of cement mortar on the inner wall of steel pipes

Description :

　　The pre rust removal treatment and on-site construction difficulties of cement mortar anti-corrosion steel pipes have increased the construction cost of pipelines, which is difficult for owners to bear. Currently, in large and medium-sized cities in China, lining anti-corrosion steel pipes are basically used as pipeline linings to achieve the purpose of corrosion prevention. The generation of corrosion and rust on the inner wall of the pipeline ensures that the pipeline maintains a good water supply state for a long time with a low friction coefficient. The cement mortar lining, relying on its own bonding force and the support of the pipeline wall, has a uniform, dense, hard and firm structure. If epoxy resin is applied to the surface of the mortar, its roughness coefficient after water flow can be further reduced. Cement mortar lining is not only a simple physical barrier, but also protects pipelines through the chemical properties of cement mortar lining. The mortar layer is combined with the pipeline to form a passive area with a pH value of up to 12 on the pipe wall surface. After water is supplied, the water seeps into the cement mortar, which is rich in alkaline components, making the water no longer corrosive when it reaches the pipe wall. Cement mortar anti-corrosion pipes have high bearing capacity, good ductility, and superior seismic performance. When used, these additives such as micro foaming agents and waterproof powders are often added to improve their workability and viscosity. There are various methods available. The pipeline itself has the characteristics of light body, easy transfer, easy welding, and few welding joints. When the pipeline is long, PE pipe trenches are laid using coiled pipes, and when construction conditions are limited, electric fusion welding is also required. The PE pipe itself uses fusion splicing to connect and package the interface materials, completing the integration of the joint and the pipe with good sealing performance. The tensile strength and strength of the interface with the pipe body are relatively high, which can effectively resist the circumferential stress and axial stress generated by internal pressure. By doing so, there is no risk of leakage caused by joint distortion in PE pipes, and the sealing function is appropriately excellent. 3PE anti-corrosion steel pipe products have good quality. The price of 3PE anti-corrosion steel pipe with inner wall cement mortar is convenient for connection in work, reasonable in price, and has a wide range of applications.

　　The conventional price for anti-corrosion steel pipes lined with cement mortar is to cut a 2-meter-long section from a pipe with a diameter of 100mm and a wall thickness of 8.7mm, and apply a uniform load on the section to prevent cracks when flattened to 3% of the pipe diameter. Pressurize with water to 15KG/CM2, then reduce the pressure and repeat 100 times. Compared with before the experiment, no cracks or peeling occurred. On the other hand, there is a tendency for the crack width to be slightly smaller... Qujing 426 * 10 cement mortar anti-corrosion steel pipe focuses on high-quality pipeline internal hanging net cement anti-corrosion technology, which has emerged and gradually matured in China in recent years. The cement mortar lining of underground water supply steel pipes is like adding a protective layer on the surface of the steel pipe, which can effectively reduce the erosion of foreign substances on the pipeline, maintain the cleanliness of the pipe wall, and effectively extend the service life of the steel pipe while also protecting water quality. Changji cement mortar anti-corrosion steel pipe can improve the water transmission capacity of the pipeline. The use of cement mortar lining technology to produce low-cost and high-efficiency cement mortar lined anti-corrosion steel pipes plays a huge role in industrial development. Due to the large shrinkage deformation, low tensile strength, and low bonding strength with old mortar of ordinary cement mortar, it is fragile and difficult to repair over time. In the 1980s, Nanjing Water Science Institute successfully developed acrylic copolymer liquid cement mortar (referred to as acrylic emulsion mortar, with a price about 80% higher than ordinary cement mortar but 50% lower than epoxy mortar). After 13 years of use in the water diversion steel pipe of Zhejiang Baizhang Hydropower Station, it was found that the coating was intact and its performance was better than more than more than ten chemical or metal coatings. The trend in the mid board market this week is slightly divergent, with strong in the north and weak in the south, but the overall trading situation in the market is still average.

　　Hanging net cement anti-corrosion is made by mixing ordinary cement with a certain thickness of yellow sand and additives according to the designed mix ratio to form mortar. It is then applied to the inner wall of the pipeline through specialized construction machinery and equipment, forming a certain thickness of mortar coating. After solidification, it becomes the lining. After anti-corrosion treatment inside the pipeline, there are many benefits. Corrosion resistance prevents pipeline aging and increases the service life of the pipeline. The cement mortar lining, relying on its own bonding force and the support of the pipeline wall, has a uniform, dense, hard and firm structure. If epoxy resin is applied to the surface of the mortar, its roughness coefficient after water flow can be further reduced. Watering should be done immediately during the final setting of the mortar to ensure its moisture level. Cement mortar lining is not only a simple physical barrier, but also protects pipelines through the chemical properties of cement mortar lining. Specifically, the overall stability of the North and Central China regions is moderate to strong, with an upward adjustment range of 20 to 60 yuan/ton. This is mainly due to the firm prices of steel billets at the beginning of the week and the increased maintenance of blast furnaces in some steel mills in the north, which has boosted the prices of small steel mills. As a result, prices have started to rebound under the support of less inventory pressure. But the premise is that the ingredients of cement mortar must meet European standards, cement mortar must be thoroughly mixed and stirred by machinery, the mortar consistency must meet the compactness requirements of the lining, and it must be used before its initial setting. On the one hand, the use of cement mortar anti-corrosion steel pipes for building water supply enhances transportation efficiency, improves transportation quality, and facilitates pipeline water delivery; On the other hand, it saves resources and reduces unnecessary losses in the pipeline. The 725 Institute of the Seventh Institute of China Shipbuilding Industry Corporation proposed to use epoxy resin as the base material, combined with modified quartz sand as the filler, and ground to prepare a series of three component corrosion-resistant epoxy mortar coatings. These coatings are used on the inner walls of pipelines in coastal cities such as Xiamen and Shenzhen, with better performance than water tank paints and significant effects.

AfterSalesService :

• Steel pipe cement mortar anti-corrosion