Hebei spiral steel pipe manufacturer, spiral steel pipe in stock, spiral steel pipe quotation

Description :

　　At present, China still has established pipeline products mainly consisting of large-diameter spiral steel pipes, thick walled spiral steel pipes, and anti-corrosion spiral steel pipes. These three types of raw material products account for the key supply proportion of the spiral steel pipe industry. In order to improve and maintain domestic raw materials, the supporting home production chain of anti-corrosion spiral steel pipes will be upgraded along with cost upgrades and chemical raw material exhibitions. In the future, the demand for large-diameter spiral steel pipes, thick walled spiral steel pipes, and anti-corrosion spiral steel pipes in China will increase. In the end, it is necessary to manually process the magnetic flap level gauge and use the corresponding equipment to remove all the congestion. Generally speaking, these three methods are integrated and used together, which will be more useful in assisting us in sorting and clearing

　　The spiral steel pipe for weld treatment sends the strip steel into the welded pipe unit, where it is gradually rolled up by multiple rollers to form a circular billet with open gaps. The pressing amount of the extrusion roller is adjusted to control the weld gap between 1-3mm and make the two ends of the weld flush. If the gap is too large, it will reduce the proximity effect and insufficient eddy current heat.

　　In order to obtain stable welding specifications, (8) all welded seams are inspected by an online continuous ultrasonic automatic damage tester, ensuring the non-destructive testing coverage of spiral welds. If there are defects, automatic alarms and spray marks are triggered, and production workers adjust process parameters accordingly to timely detect defects. (9) An air plasma cutting machine is used to cut steel pipes into single pieces.

　　Thick walled spiral steel pipes are welded by arc welding under the flux layer, using the heat generated by the arc burning between the flux and the welding wire under the flux layer to form the base metal and melted welding wire flux. During use, the principal stress direction of thick walled spiral steel pipes, that is, the equivalent defect length in the direction of the steel pipe axis, is smaller than that of straight seam pipes; If the pipe length is L, the weld length is L/cos (θ). The long-standing debate between spiral steel pipes and straight seam pipes is mainly due to the fact that the defect is parallel to the weld seam, so for spiral steel pipes, the defect of the weld seam is a "diagonal defect". Secondly, since pipeline steel is all rolled steel plates, the impact toughness has a large anisotropy, and the CVN value along the rolling direction can be three times higher than that perpendicular to the rolling direction. The weld seam of spiral steel pipes is longer than that of straight seam pipes, especially when compared with UOE steel pipes, which is superior.

　　Note: "Qu" is the capital letter of the Chinese pinyin of the character "Qu", followed by the number of the yield point () value of the grade. The symbol after it is divided into four grades according to the impurity element (sulfur, phosphorus) content of the steel, from high to low, accompanied by changes in carbon and manganese elements. Carbon structural steel is divided into four grades according to the metallurgical quality, and the Si content of each grade of steel is 0.3%.

　　With the help of X-ray photography, it can be seen that during the pressure test of the spiral steel pipe hydraulic testing machine, the two ends of the tested steel pipe are first sealed by an end sealing device and low-pressure water is injected. During the water injection process, the air inside the pipe is discharged through an exhaust valve. After the low-pressure water is filled, high-pressure water is injected into the pipe through a pressure increasing device to increase the pressure until the specified test pressure is reached.

　　It must be stacked according to principles. Spiral steel pipe manufacturers should first actively expand the variety of large-diameter spiral steel pipes used in building steel structures, improve product performance, including welded structural steel, thick plates, hot formed pipes, weldable cast steel, etc. Expand the variety and specifications of cold-formed steel and hot-rolled H-beams, including large section cold-formed pipes.

　　With the development of spiral steel pipe manufacturing technology today, we should comprehensively and correctly evaluate and compare, and re-examine the problem of long welds in spiral steel pipes. The main stress experienced by thick walled spiral steel pipes is exactly perpendicular to the direction where the pipe has low impact resistance. Spiral seam submerged arc welded steel pipes bend hot-rolled strip steel into a spiral shape, and use submerged arc automatic welding to weld the inner and outer seams to make spiral seam steel pipes. However, spiral steel pipes are staggered in the direction where the pipe material has low impact resistance, turning the disadvantage of long weld seams into an advantage. Due to the following reasons, they can be widely used in the production of large-diameter steel pipes: 1) because they are continuously bent, the length of the steel pipe is not limited; 2) By changing the forming angle, steel pipes of various diameters can be produced using the same width of strip steel; 3) Easy to change size, suitable for the production of small batches and multiple varieties of steel pipes; 4) The spiral shape of the weld seam is evenly distributed throughout the circumference of the steel pipe, so the dimensional accuracy and strength of the steel pipe are high.

AfterSalesService :

• Hebei spiral steel pipe