Steel sleeve steel composite insulation pipe, directly buried steel sleeve steel insulation pipe, steel sleeve steel seamless pipe manufacturer

Description :

　　Steel insulated steel pipes with steel sleeves are divided into external sliding types: the insulation structure consists of working steel pipes, glass wool insulation layers, aluminum foil reflective layers, stainless steel fastening steel strips, sliding guide brackets, air insulation layers, external protective steel pipes, and external anti-corrosion layers. (1) Working steel pipes: According to the technical requirements of the conveying medium, seamless steel pipes, double-sided submerged arc spiral welded steel pipes are used. Whether to use uncompensated laying or compensated laying, the principle is that the straight pipeline is longer and there are fewer branches in the middle. Otherwise, compensated laying should be considered. For the production and processing of polyurethane insulated steel pipes, specific applications and structures need to be treated accordingly. The development status and future of steel insulated pipes with steel sleeves. 7. The moisture discharge pipe is welded to the steel sleeve and led out from the lower part into a dedicated well or back to the ground. The moisture-proof pipe leading out of the ground is equipped with a bend opening that bends downwards, and the height of the bend from the ground is not less than 0.25m. At the same time, the polyurethane buried insulation pipe can achieve anti-corrosion and does not absorb water, so the installation position of the pipeline is not limited and can be used in various locations. (4) Leakage alarm line: When manufacturing high-temperature prefabricated buried insulation pipes, an alarm line is buried in the insulation layer near the steel pipe. Once a leakage occurs in a certain part of the pipeline, the transmission of the alarm line can trigger an alarm on a dedicated detection instrument and display the accurate location and degree of the leakage, so as to notify maintenance personnel to quickly deal with the leaking pipe section and ensure the safe operation of the heating network. Our commonly used insulation method is to use a hot melt sleeve for interface insulation. The specific operation method is as follows: 1. After the welding of the working steel pipe of the polyurethane insulation pipe is completed, shot blasting and rust removal should be carried out on the interface to prevent corrosion. Then, high-density polyethylene pipe skin of the same material as the outer protective pipe should be used to wrap the interface. After wrapping, a hot melt machine should be used to melt the pipe skin at the interface with the outer protective pipe of the polyurethane insulation pipe to form a solid whole.

　　For the insulation layer construction of large-diameter and long sleeve type pipelines, manufacturers usually use the horizontal direct injection method due to factors such as material formula and production site conditions. (4) Leakage alarm line: When manufacturing high-temperature prefabricated buried insulation pipes, an alarm line is buried in the insulation layer near the steel pipe. Once a leakage occurs in a certain part of the pipeline, the transmission of the alarm line can trigger an alarm on a dedicated detection instrument and display the accurate location and degree of the leakage, so as to notify maintenance personnel to quickly deal with the leaking pipe section and ensure the safe operation of the heating network. Today, let's mainly learn about the advantages of the external sliding structure of steel insulated pipes with steel sleeves? 2. The external sliding insulation structure consists of a working steel pipe, a glass wool insulation layer, an aluminum foil reflective layer, a stainless steel fastening steel strip, a sliding guide bracket, an air insulation layer, an external protective steel pipe, and an external anti-corrosion layer. As is well known, even rubber and plastic pipe products with strong corrosion resistance, compression resistance, and tolerance may not be blocked in the pipeline due to the accumulation of garbage or pollutants during long-term use. Due to the direct burial of pipelines, insulated pipelines are directly subjected to soil and ground live loads, as well as underground moisture and groundwater erosion. Therefore, insulated buried pipelines require high performance in terms of waterproofing, anti-corrosion, and mechanical strength. Therefore, the cost of directly buried pipeline projects is relatively high. Whether to use uncompensated laying or compensated laying, the principle is that the straight pipeline is longer and there are fewer branches in the middle. Otherwise, compensated laying should be considered. Whether to use uncompensated laying or compensated laying, the principle is that the straight pipeline is longer and there are fewer branches in the middle. Otherwise, compensated laying should be considered. The sound insulation performance of polyurethane buried insulation pipes is very good, avoiding the disturbance of liquid flowing through the pipeline during transportation. As is well known, even rubber and plastic pipe products with strong corrosion resistance, compression resistance, and tolerance may not be blocked in the pipeline due to the accumulation of garbage or pollutants during long-term use.

AfterSalesService :

• Steel sleeve steel composite insulation pipe