Epoxy resin anti-corrosion steel pipe buried 820 anti-corrosion steel pipe large diameter spiral steel pipe manufacturer

Description :

　　The price of 3pe anti-corrosion straight seam welded steel pipes fluctuates, and the energy demand and market trend of 3pe anti-corrosion steel pipes. With the sustained and rapid development of the economy, China's energy demand continues to increase, and the amount of pipeline construction is also increasing. More than 40000 kilometers of oil and gas pipelines will be built, and there are countless gas supply, water supply, and heating pipelines to be built in urban planning. This makes pipeline corrosion protection increasingly important. Pipeline anti-corrosion usually adopts a combined protection method of anti-corrosion coating and cathodic protection. The pipeline anti-corrosion coating is the first barrier, which directly affects the anti-corrosion performance and operating life of the pipeline.

　　In the three-layer structure, the main function of the fusion bonded epoxy powder coating is to form a continuous coating film, directly bond with the surface of the steel pipe, and have good chemical corrosion resistance and cathodic stripping resistance; Reacts with the active groups of the intermediate layer adhesive to form a chemical bond, ensuring that the overall anti-corrosion layer has good adhesion at higher temperatures. The intermediate layer is usually a copolymer adhesive, which is mainly composed of polyolefin. Currently, ethylene based copolymer adhesives are widely used. The polar functional groups of the Zhongyuan pipeline copolymer adhesive can react with the epoxy groups of the fusion bonded epoxy powder coating to form hydrogen bonds or chemical bonds, forming a good bond between the intermediate layer and the bottom layer; The non-polar ethylene portion has a good affinity with the surface layer polyethylene, so the intermediate layer also has good bonding performance with the surface layer. The main function of polyethylene surface layer is to provide mechanical protection and anti-corrosion, which is the same as the traditional two-layer structure polyethylene anti-corrosion layer.

　　The surface defects of 3PE anti-corrosion steel pipes can be caused by special snap ring connections, groove (clamp) connections, or threaded connections. The construction process is similar to the groove connection of steel pipes and the threaded connection of steel pipes. Quality and technical parameters of plastic lined steel pipes for water treatment High strength, high impact resistance. Rubber elastomers have a low density (. g/cm), light weight, good vibration absorption performance, and excellent mechanical impact resistance. They have high strength, good rigidity, no creep, impact resistance, earthquake resistance, and strong water hammer resistance. They are easy to transport, install, and maintain. Once it was introduced, it fully demonstrated the unparalleled superiority of traditional anti-corrosion methods with its excellent physical and chemical properties, processability, and environmental friendliness.

　　Gas buried wrapped PE anti-corrosion steel pipe on-site processing of cast iron is cheap, but its strength is low and can only be used in low-pressure situations. Polyurethane rigid foam insulation products have been widely used in the field of building insulation and waterproofing, and have become one of the leading energy-saving insulation products in the market. As an integrated material for building insulation and waterproofing, polyurethane rigid foam breaks the traditional single function of building materials - waterproofing without insulation, insulation without waterproofing. Once the waterproof layer leaks, the insulation layer immediately loses its insulation function. Compared with other single function insulation or waterproof materials, polyurethane rigid foam has obvious advantages: 1. Polyurethane rigid foam has the function of multi-purpose material, and also has many functions such as insulation, waterproofing, sound insulation, and vibration absorption. Steel sleeve steel insulation pipe manufacturer 2. Insulation performance, it is currently the insulation material with thermal conductivity (≤ 0.024) and thermal resistance among all building materials in China. Its thermal conductivity is only half of EPS foam polystyrene board. 3pe anti-corrosion steel pipe is a pipeline (steel pipe) used in different working environments. To slow down or prevent the corrosion and deterioration of pipelines under the chemical or electrochemical action of external media or the metabolic activity of microorganisms, 2 or 3 layers of polyethylene (3PE) are coated on their outer walls to achieve pipeline anti-corrosion.

　　3PE anti-corrosion steel pipes are mainly made of polyethylene and high-density polyethylene according to national standards, with a Vicat softening point set at not less than 110 ℃; The thickness of the external anti-corrosion layer is determined according to the German standard mainly composed of low and medium density polyethylene. Greatly improved the impact resistance of the 3PE anti-corrosion coating. SY/T0413-2002 significantly improved the peel strength and impact resistance indicators of the 3PE anti-corrosion layer, and clearly stipulated the mechanical strength and weather resistance of the 3PE anti-corrosion layer based on the carbon black content of some special materials. It also increased the sampling frequency of the joint peeling strength (i.e. the peeling strength of the heat shrink sleeve and heat shrink tape to the primer steel). The single-layer epoxy powder of 3PE anti-corrosion steel pipe fundamentally ensures the anti-corrosion effect of the anti-corrosion steel pipe, and then proceeds to the next process: adhesive three-layer structure polyethylene anti-corrosion layer (3PE) combines the excellent properties of fusion bonded epoxy powder coating and extruded polyethylene anti-corrosion layer.

AfterSalesService :

• Epoxy resin anti-corrosion steel pipe