Large caliber anti-corrosion steel pipe buried epoxy coal tar anti-corrosion steel pipe manufacturer

Description :

　　Manufacturer of large-diameter epoxy coal tar anti-corrosion steel pipes 2. After rust removal and inspection, the steel shall be coated with primer and topcoat. During painting, the welding position of the steel assembly shall be left as much as possible, with a reserved length of about 150mm, to avoid difficulty in cleaning the root during welding and affect the welding quality. 3. For steel surfaces with a high degree of pit dust (>2mm), putty should be mixed to level it up Mix the epoxy coal tar paint thoroughly and let it mature for 15-30 minutes, then use it up within 4 hours. 5. Apply a coat of topcoat after the primer surface dries and before curing, and apply a second coat of topcoat after the topcoat dries and before curing. During construction, the process flow is often continuous, so special attention needs to be paid to the painting interval time to ensure that the painting interval is between small and small. It is mainly used for anti-corrosion of the outer walls of buried or underwater steel oil, gas, water, and heating pipelines. It is also suitable for anti-corrosion of various steel structures, docks, ships, water gates, gas storage tanks, equipment in refineries and chemical plants, as well as waterproofing and leakage prevention of concrete pipes, sewage tanks, roof waterproof layers, bathrooms, basements, and other concrete structures. Cement mortar lined steel pipes for water supply pipeline internal anti-corrosion.

　　Epoxy coal tar glass cloth steel pipe anti-corrosion. IPN8710 polymer non-toxic coating for water supply pipeline internal anti-corrosion of steel pipes. Sales of epoxy coal tar anti-corrosion coatings, IPN8710 coatings, chlorinated rubber anti-corrosion coatings, polyurethane anti-corrosion coatings, and other anti-corrosion coatings. High density polyethylene polyurethane foam insulated steel pipe. Epoxy coal tar anti-corrosion spiral steel pipe is commonly referred to as "several cloth and several oil". Common types include one cloth and two oil, three oil and two cloth, three cloth and four oil, three cloth and five oil, six oil and two cloth, four cloth and six oil. The components of epoxy coal tar anti-corrosion spiral steel pipe are epoxy coal tar primer and topcoat, both of which are mainly composed of epoxy resin and coal tar as film-forming materials. During on-site construction, the interval time for coating should be determined based on the performance of the coating and weather conditions. If the interval between paint reapplication is too long, the paint surface needs to be roughened with sandpaper or grinding wheel before applying the final coat of paint. 7. After the steel sandblasting is qualified, the primer should be applied immediately. Therefore, attention should be paid to the influence of dust on the painting. When painting, try to stay away from the sandblasting area or suspend the sandblasting construction as much as possible. 8. The operation of epoxy coal tar paint should be carried out according to the material instructions and specifications provided with the goods.

　　Internationally, it is widely believed that epoxy coal tar paint is an ideal anti-corrosion coating for underground actinide layout components, and all key projects of Haiyuan Construction cannot do without epoxy coal tar anti-corrosion paint. Epoxy coal tar paint with strong anti-corrosion properties has been highly valued in the deployment of modern chemical equipment. China has abundant coal tar resources, but due to outdated processing techniques, it has been widely accepted. 3. Good flexibility: Polyethylene pipes are a type of high toughness pipe with a fracture elongation of over 500%. The flexibility of polyethylene pipes makes them easy to bend. In engineering, obstacles can be bypassed by changing the direction of the pipeline. In many cases, the flexibility of the pipeline can reduce the amount of pipe fittings and lower installation costs. The service life of 3pe anti-corrosion pipes is extended by 3-5 times. (1) Through a review of the 30-year application history of polyethylene anti-corrosion coatings in Europe, although theoretically corrosion or stress corrosion cracking may occur under peeling anti-corrosion coatings, there have been no cases of under film corrosion or stress cracking under peeling anti-corrosion coatings so far. At the Mannesmann Institute in Germany, long-term corrosion laboratory experiments were conducted to simulate the application effect of anti-corrosion coatings. The corrosion experiment environment includes soil and water. The main focus of the experiment is to check for stress corrosion cracking issues. The experimental anti-corrosion method involves placing defective polyethylene coated steel pipes under corrosive and stress conditions.

AfterSalesService :

• Large diameter anti-corrosion steel pipe