Spot supply of epoxy coal tar anti-corrosion steel pipes, five cloth and seven oil anti-corrosion steel pipe manufacturers

Description :

　　The components of epoxy coal tar anti-corrosion steel pipes are epoxy coal tar primer and topcoat, both of which are mainly composed of epoxy resin and coal tar as film-forming materials, and are made by adding various anti rust pigments, insulating fillers, toughening agents, leveling agents, diluents, anti settling agents, etc. The B component is modified amine curing agent or mainly composed of curing agent, with added pigments and fillers. When this product is sold, components A and B are supplied together. During construction, they are mixed in proportion and mixed evenly before being used up within the specified time. Cangzhou Xinghao Pipeline Co., Ltd. produces epoxy coal tar anti-corrosion coating construction coatings according to the mix proportion provided by the manufacturer. First, pour the primer or topcoat into a clean container, and then slowly add the curing agent while stirring evenly. After opening the paint bucket, stir the paint inside the bucket thoroughly to ensure even mixing and no sedimentation. The prepared seasoning must be matured for 30 minutes before use, and the coating prepared at room temperature can be used for about 4-6 hours. Brushing, during the brushing process, if the viscosity is too high to brush, a diluent with a weight not exceeding 5% can be added. When operating, first apply primer on the rust removed steel pipe as soon as possible, evenly and without omission. Leave about 150mm at each end of each steel pipe for welding before painting. After the primer is completely dry, mix it with topcoat and talcum powder to form putty. Apply the topcoat evenly on top of the primer and ensure that it is not missed. Anti corrosion environmental conditions: The corrosion process of buried metal pipelines mainly includes the following three aspects: 1. Electrochemical dissolution corrosion process. Soil is a complex mixture composed of solid, liquid, and gaseous substances. Due to the solid skeleton formed by soil particles, it is filled with air, water, and various salts. The presence of moisture and salts that can conduct ions in soil gives it the characteristics of an electrolyte solution, causing electrochemical dissolution corrosion of metals. 2. Due to the influence of external leakage, stray currents pass through the soil, causing stray current corrosion. 3. Biological corrosion occurs in the soil due to its effects. Request for anti-corrosion coating: 1. Due to the difficulty of repairing anti-corrosion coatings on underground pipelines, in order to ensure the service life of the pipelines, the anti-corrosion coating should have a long service life. 2. The selected coating varieties should have excellent rust resistance, impermeability, and moisture resistance. Considering that pipelines may cross contaminated soil or rivers, the coating should also have excellent chemical resistance. 3. The anti-corrosion coating should be resistant to penetration by plant root diameter. 4. Considering the equipment and transfer requirements, the coating should have good wear resistance, abrasion resistance, and collision resistance. Asphalt coated steel pipes are mainly divided into two types: petroleum asphalt glass cloth coating and coal tar asphalt glass cloth coating. They have been widely used in organic coated steel pipes for a long time.

　　Epoxy coal tar anti-corrosion steel pipe is currently well evaluated for its anti-corrosion coating application effect both domestically and internationally There are few reports on the defects that occur during its use The main drawback of the report is the exposure be stripped. Cathodic stripping Cathodic protection shielding Peel off the anti-corrosion layer and prevent corrosion under the film Moreover, most of the reports on defects are still at the stage of theoretical speculation As mentioned in the data, there is an issue with cathodic protection shielding So far, there have been no reports of cathodic protection shielding in the actual operation of anti-corrosion coatings Years of practice have shown that As the service life increases The scope of application is mainly used for underground or underwater steel oil transportation Gas transmission Water supply Corrosion prevention of the outer wall of heating pipelines It is also applicable to various types of steel structures The dock a ship. Water gates Gas storage tank Corrosion prevention and concrete pipes for equipment in refining and chemical plants Sewage tank Roof waterproof layer TOILET. Waterproofing and leakage prevention of concrete structures such as basements Epoxy coal tar anti-corrosion steel pipe is commonly referred to as "several cloths and several oils", commonly including one cloth and two oils, three cloths and two oils, five steps and three oils, seven cloths and four oils. The components of epoxy coal tar anti-corrosion spiral steel pipe are epoxy coal tar primer and topcoat, both of which are mainly composed of epoxy resin and coal tar as film-forming materials, and are made by adding various anti rust pigments, insulating fillers, toughening agents, leveling agents, diluents, anti settling agents, etc. Although the epoxy coal tar paint industry started late, it has developed rapidly, and there is a lack of good communication and coordination between paint production enterprises and downstream enterprises. In the past, paint production companies only focused on the technological research and development of epoxy coal tar paint products, while downstream paint companies only focused on improving coating technology and did not fully grasp the performance of paint products, resulting in paint not being fully utilized in practical applications. To improve the performance of paint products, but neglecting their practical application effects, outdated painting equipment and technology limit the application and development of coating products. Technology has always been a weak link in the development of China's epoxy coal tar paint industry, as well as a bottleneck faced by downstream industries in the paint industry. Innovative paint products are constantly being updated and replaced, but if there is a lack of communication between manufacturers and users, it will lead to a lag in the corresponding coating equipment and technology research and development. In the development situation of rising raw material prices, logistics and cost increases, the integration of paint and coating can help effectively control costs and achieve a win-win situation between both parties. For paint companies, the integration of epoxy coal tar paint coating can help paint production companies discover problems in a timely manner, improve production technology, timely develop products that meet market demand, reduce research and development costs and promotion resistance. For downstream paint companies, the integration of paint and coating can reduce product failure rates, reduce losses, and improve product quality

AfterSalesService :

• Epoxy coal tar anti-corrosion steel pipe