UHZ-10C00N high-temperature magnetostrictive liquid level gauge lined with PTFE material with a density of 0.46g
Category:
Instrumentation/Level instrument/Magnetic flap level gauge
Model:
UHZ-10C00N
Brand:
Wesker
model:
UHZ-10C00N
measurement range:
100-6000
measurement accuracy:
±10
resolution:
- -
blind spot:
- -
pressure:
- -
power supply voltage:
twenty-four
analog output:
4-20mA
digital output:
4-20mA HART
Measurement tube material:
304 316
Protection level:
IP65
Processing & Customization:
yes
Overall dimensions:
- -
weight:
- -
Place of Origin:
- -
measurement method:
- -
Installation type:
Side mounted top mounted
medium density:
- -
medium temperature:
- -
power supply:
twenty-four
output method:
4-20mA
Explosion-proof rating:
BT5 BT6
manufacturer:
Wesker
Retail Price
450.00USD
重量
kg
- Product Description
-
model UHZ-10C00N
measurement range 100-6000
measurement accuracy ±10
resolution - -
blind spot - -
pressure - -
power supply voltage twenty-four
analog output 4-20mA
digital output 4-20mA HART
Measurement tube material 304 316
Protection level IP65
Processing & Customization yes
Overall dimensions - -
weight - -
Place of Origin - -
measurement method - -
Installation type Side mounted top mounted
medium density - -
medium temperature - -
power supply twenty-four
output method 4-20mA
Explosion-proof rating BT5 BT6
manufacturer Wesker
Description :
Working principle of magnetostrictive level gauge:
The magnetostrictive liquid level gauge consists of three parts: a detection rod, a circuit unit, and a float. During measurement, the circuit unit generates a current pulse that propagates downwards along the magnetostrictive line and generates a circular magnetic field. A float is installed outside the detection rod, which moves up and down along the detection rod with the change of liquid level. Due to the presence of a set of permanent magnets inside the float, it simultaneously generates a magnetic field. When the current magnetic field meets the float magnetic field, a "twisted" pulse, also known as a "return" pulse, is generated. Convert the time difference between the "return" pulse and the current pulse into a pulse signal to calculate the actual position of the float and measure the liquid level.
UHZ-10C00N high-temperature magnetostrictive liquid level gauge lined with PTFE material with a density of 0.46g
UHZ-58/CG/A71 UHZ-58/CG/A72 UHZ-58/CG/A80 UHZ-58/CG/A81 UHZ-58/CG/A82 UHZ-58/CG/A83 UHZ-58/CG/A84 UHZ-58/CG/A UHZ-58/CG/A86 UHZ-58/CG/A87 UHZ-58/CG/A88 UHZ-58/CG/A89 UHZ-58/CG/A90 UHZ-58/CG/A91 UHZ-58/CG/A92 UHZ-58/CG/A93 UHZ-58/CG/A94 UHZ-58/CG/A95 UHZ-58/CG/A96 UHZ-58/CG/A97 UHZ-58/CG/A98 UHZ-58/CG/A8099
The advantages of using magnetostrictive level gauges for measuring oil tank levels are as follows:
1. Strong reliability: Due to the waveguide principle used in magnetostrictive liquid level gauges, there are no mechanical movable parts, so there is no friction or wear. The entire converter is enclosed in a stainless steel tube, which is non-contact with the measuring medium. The sensor works reliably and has a long service life.
2. High accuracy: Due to the use of waveguide pulses in magnetostrictive liquid level gauges, the measured displacement is determined by measuring the time of the starting and ending pulses during operation. Therefore, the measurement accuracy is high, with a resolution better than 0.01% FS, which is difficult to achieve with other sensors.
3. Good safety: The magnetostrictive level gauge has high explosion-proof performance, intrinsic safety, and safe use, especially suitable for measuring chemical raw materials and flammable liquids. There is no need to open the can lid during measurement to avoid the safety hazards of manual measurement.
4. Magnetostrictive level gauges are easy to install and maintain: Magnetostrictive level gauges are generally installed through existing pipe openings on the top of the tank, and are particularly suitable for the installation of underground and operational storage tanks, without affecting normal production during the installation process.
5. Facilitating system automation work: The secondary instrument of the magnetostrictive level gauge adopts standard output signals, which are easy for the microcomputer to process the signals and achieve networking work, improving the automation level of the entire measurement system.
UHZ-10C00N high-temperature magnetostrictive liquid level gauge lined with PTFE material with a density of 0.46g
AfterSalesService :
Key words:- High temperature magnetostrictive level gauge
More Products
